Fluids Live monitoring system upgraded for greater reliability

07 June, 2019

Using lubricants effectively and maximising their efficiency is of course crucial in the industrial sector. Production engineering professionals will know the severe implications of machinery downtime.

R+L Hydraulics GmbH adds test couplings to portfolio

24 May, 2019

R+L Hydraulics GmbH has added test couplings to its products offering. The new couplings offered by the hydraulics and power transmission specialist are designed for testing pressure, lubrication, bleeding air and sampling oil in a wide variety of mobile and fixed position hydraulic applications for industry, construction machinery, agricultural machinery, naval, energy and environmental technology, mechanical engineering, automobiles and rail vehicles.

MP Filtri introduces new portable particle counter

17 May, 2019

MP Filtri's next-generation LPA3 portable particle counter is now available. The culmination of an exhaustive three-year research and development programme, the LPA3 offers a compelling feature set, outstanding speed and accuracy, and is fully portable – enabling operators to enjoy the functionality of the lab even when out in the field.

ExxonMobil Industry 4.0 guide for plastics processors

03 May, 2019

ExxonMobil has developed its ‘Advancing Industry 4.0 in Plastics with Hydraulic Fluids’ guide in partnership with industry expert, Dr Robin Kent. The free handbook explains how selecting a high-performance fluid will not only protect hydraulic systems but also help reduce energy use and enhance plant performance.

IIoT fuels major growth opportunities for intelligent pumps in Europe

26 April, 2019

Increased customer demand to derive maximum output from legacy equipment is driving pump manufacturers to integrate enhanced technological features into existing pumps, according to Frost & Sullivan.

Control valves for challenges of reverse osmosis applications

18 April, 2019

The challenges associated with process systems operating in highly corrosive marine and salt water environments, requires amongst many things, control valves which are designed to provide high corrosive resistance. A good example of this is on reverse osmosis plants and salt water desalination plants in marine applications which is where Badger Meter valves have proven to be very effective. Represented in the UK by Pump Engineering, Badger Meter RC250/200 Valves are the control valve options which have proven highly effective on these plants.

Telescopic cylinders for industrial lifts in confined spaces

10 April, 2019

Enerpac has introduced the RLT-Series range of low-height telescopic hydraulic cylinders for applications requiring a long cylinder stroke in confined spaces commonly found during machinery positioning and tool fastening. With a lifting capacity of 4.4 to 74.1 ton, the low-height cylinders are available with two or three pistons and can lift loads up to 40 mm (1.57 in.) in a single movement.

Trelleborg showcases sealing solutions at subsea event

04 April, 2019

Cutting-edge solutions for high-integrity sealing applications developed by Trelleborg Sealing Solutions were recently showcased at Subsea Expo in Aberdeen (5 to 7 February), the annual subsea exhibition and conference.

Base oil for ‘sustainable mobility and a cleaner future’

02 April, 2019

Petronas Lubricants International (PLI) has unveiled its base oil ETRO+, the next evolution in Group III base oils. An improvement from the existing ETRO brand, ETRO+ is a Group III+ base oil that promotes fuel efficiency and the reduction of CO2 emissions.

Atos unveils new range of hydraulic filters

28 March, 2019

After 60 years’ experience in the design and manufacture of a wide range of high-performance electrohydraulic products and systems – digital proportionals & electronics, conventional valves, cylinders and Servoactuators – Atos has now developed a new range of quality hydraulic filters, equipped with high-efficiency filtering elements and engineered with inorganic microfibres to ensure β×(c) > 1000 for all filtration ratings.

Hydrotechnik UK launches HTUK Watchlog

26 March, 2019

Hydrotechnik has launched a new Wireless Data Monitoring and Acquisition system, designed for continuous measurement and monitoring of critical machinery, processes and systems.

High-performance hose provides secure supply to Hexapod drives

22 March, 2019

Dynamic movements in drive cylinder in all six degrees of freedom, test frequency of up to 100 hertz, a tight installation area: installing hydraulic hoses in Hexapod test benches to be used by automotive manufacturers to test suspension elements is a challenge. Oelhydraulik Hagenbuch AG therefore uses flexible high- performance hoses from Eaton's Aeroquip Triple Crown product range.

Pearson Hydraulics acquires P&R Hydraulics

15 March, 2019

Pearson Hydraulics Ltd has acquired P&R Hydraulics for an undisclosed sum.

Enerpac launches ZC-Series cordless pumps

15 March, 2019

High-pressure hydraulic tools specialist, Enerpac, has introduced the ZC-Series cordless hydraulic pump combining the performance of an electric pump with the convenience and portability of a battery pump.

New role, familiar face at Albion Valves

08 March, 2019

It looks like second time around is proving to be a positive move for Pete McGrath as he re-joins Albion Valves – the supplier of commercial valves and fittings – in the newly created position of national contracts manager.