- Home » Editorial » Hydraulics
Polymer solutions to improve the efficiency of water systems
Fluid handling equipment may suffer from multiple problems including physical and mechanical damage as well as general or localised erosion and corrosion. These problems are linked to decreased efficiency and poor performance, leading to increasing operational costs. Minimising performance deterioration is therefore an important factor for pump manufacturers and end users. Indeed, hydraulic losses account for most of the efficiency decrease (9 per cent for a mixed flow pump to 20 per cent for radial flow). Coating technology can help in decreasing these losses, increasing the pump’s performance and reducing operational costs.
Trelleborg and Schoolhill in Shah Deniz project
Trelleborg Sealing Solutions claims to have “pushed the barriers of science” to produce a “highly innovative” seal for a valve designed by Schoolhill Hydraulic Engineering for BP’s Shah Deniz field.
New universal gas charging kit for accumulators from Hydrotechnik
Hydrotechnik has launched its new universal World Wide nitrogen gas charging kit for accumulators, dampers, fire suppression and other pneumatic or gaseous systems.
Keep your hydraulic hoses safe and operational
The British Fluid Power Association (BFPA) considers some important aspects to consider when sourcing, fitting, maintaining or replacing hydraulic hose and hydraulic hose assemblies as part of a service and maintenance regime in mission-critical sectors such as quarries and mines.
Practical contamination management for hydraulic systems
By Iain Hanson, general manager – fluid power, Brammer UK.
Quick, safe and accurate control of heavy loads in motion
SPX Power Team has developed a PLC synchronised lifting and lowering Motion Control System (MCS) to reduce the risk of bending, twisting or tilting when lifting heavy loads in motion. When a large object is moved, stresses are placed on the object due to uneven weight distribution or load-shifts between the lift points. If the mover is not careful, the object can bend or twist creating a stress riser that can cause hundreds of thousands - or in the worst cases - millions of dollars in damage.
Tube connection system for extreme conditions
The multi-part steel flare fittings are part of the Stauff Connect range which was developed for the detachable connection of tubes. They consist of fitting bodies, cone adapters with O-rings, support sleeves and union nuts and they are suitable for all common metric outer tube diameters from 6 to 42 mm.
Enerpac hydraulic cylinder lifting accuracy enables Pioneering Spirit fast lift
Enerpac has supplied the high pressure, hydraulic cylinder technology for the topsides lift system beams on Allseas ‘Pioneering Spirit’ vessel. The cylinders are an integral part of the vessel’s lift system, enabling the installation and decommissioning of complete topsides weighing up to 48,000 tonnes.
Clean-break coupling makes connection easier
Stäubli has introduced a new range of clean break, flat face, connectors that are claimed to be suitable for all fluids, fully compatible with the well-known SCB range but much easier to connect.
Vending solution affords major savings for Flowplant
UK distributor of industrial maintenance, repair and overhaul (MRO) products and services, Brammer, has helped Flowplant save 60 per cent on its consumable spend through industrial vending solution, Invend.
UK hydraulics firm ensures the Show Goes On for Royal Shakespeare Company
A UK hydraulics firm pulled off a stellar performance to arrange manufacture and delivery of a range of hydraulic cylinder components in a short space of time, for the opening night of a new performance at The Royal Shakespeare Company (RSC).
Newly extended Moduflex valve system
Parker has introduced its newly extended Moduflex valve system, a range of valves designed to conform to any application requirements. Available configured from basic components or as a pre-assembled and tested valve island, the valve system can be adapted simply once specified.
Electro-hydraulic actuators deliver improved safety at India’s tank farms
Following an accidental fire at the IOCL Jaipur Terminal, an extensive review of safety measures recommended by the MB Lal Committee has resulted in the introduction of failsafe actuators for critical tank farm applications. These valves, known as ROSOV (Remote Operated Shut-off Valves), now provide tank overfill protection at the majority of storage facilities owned by the Indian oil industry.
Top ten tips – oil analysis
With between 70 and 80 per cent of all hydraulic failures caused by contaminated oil, effective analysis is vital to ensuring the healthy functioning of machinery. Bosch Rexroth outlines its top ten tips for maintaining oil quality.
New valve offerings from Webtec
Webtec, the Cambridge (UK) based hydraulic measurement and control company, has launched a brand new range of hydraulic high-pressure, near zero-leak directional control valves specifically designed for use on marine and offshore hydraulic control/power units. Typical applications include drill rigs, deck machinery, lifting equipment and grease injection units.
-
Smart Manufacturing & Engineering Week
05 - 06 June, 2024
NEC, Birmingham -
HILLHEAD 2024
25 June, 2024, 9:00 - 27 June, 2024, 16:00
Hillhead Quarry, Buxton, Derbyshire UK
