The new RCT coupling from Reich-Kupplungen

17 August, 2016

Reich-Kupplungen has expanded its product portfolio with the addition of the RCT series, consisting of torsionally stiff flange couplings for diesel engine drive systems.

Low-approach slide bed system

17 August, 2016

The vehicle recovery market has traditionally been supplied with hydraulic slide bed-type vehicles for many years. These generally give an approach angle of between 7 -9 degrees depending on chassis and body length.

Bobcat excavators increase power and reliability at Southgold

17 August, 2016

From internal demolition work to groundworks projects, new Bobcat compact excavators supplied by Authorised Dealer, Bobcat of London, are providing increased power and reliability for Southgold, the South London-based family-run construction company, specialising in both new build and conversion projects throughout the South East of England.

AMC Jets uses big data to cut hydraulic failures

17 August, 2016

AMC Jets has over 20 years’ experience in servicing companies using high pressure water jet cutting technologies worldwide. A potential and widespread issue in the field of operations is a reduction in hydraulic system pressure, which often leads to performance decay of the water pressure intensifier.

Hydrotechnik expands gas charging test kit product range

17 August, 2016

Hydrotechnik UK has expanded its range of gas charging and testing kits. Five kits now make up the range from simple test and charging kits for under £200 through to the new World Wide Universal kit, which caters for over 95 per cent of the world’s accumulators. A new detailed catalogue showcases the full range.

Titanium oil coolers with ten-year guarantee

10 June, 2016

Bowman oil coolers are recognised worldwide for their performance, reliability and durability across a range of demanding hydraulic cooling applications. However, the company adds that some cooling requirements demand even higher levels of durability, due to the highly aggressive nature of the cooling medium used in the system.

New range of pumps, motors and control valves from Kawasaki Precision Machinery

10 June, 2016

Kawasaki Precision Machinery set out to help manufacturers improve efficiency and cost savings, with the launch of a new range of pumps, motors and control valves at Bauma in April.

Oilgear manufacturing investment leads to pump range expansion

10 June, 2016

A new range of variable displacement pumps has been launched to the EMEA market as a result of a multi-million pound investment made by Oilgear to its manufacturing facilities. The new range of axial piston pumps complement Oilgear’s existing product range and add greater flexibility and efficiency for the company’s bespoke electro-hydraulic packages; suitable for industries as diverse as construction, marine and defence.

New test bench at KTR

10 June, 2016

KTR has installed a new test bench for large couplings at its headquarters in Rheine, covering a performance range up to 500,000 Nm. The test bench allows users to calculate mechanical coupling parameters and perform service life testing.

ATEX-certified gear couplings from R+L Hydraulics

10 June, 2016

R+L Hydraulics GmbH now offers Lovejoy gear couplings with ATEX-certification. These robust gear couplings excel with high performance and simple maintenance, resulting in cost-efficient solutions. Typical applications include pumps, chisels, mixers, presses, steelworks, conveyor equipment, etc.

High valve performance in compact form for medical device applications

10 June, 2016

Parker Hannifin has unveiled its VSO LowPro miniature proportional valve for controlling the flow rate of inert gases in medical equipment. Just 16mm wide by 14mm tall, the valve addresses a key requirement for small portable devices where installation space is at a premium.

Technology training works – a return journey

10 June, 2016

On-site practical fluid power engineering training offers flexible modular learning, writes Ian Stephenson, director, TCL-Cumbria.

EuroVacuum claw pumps for efficiency and durability

10 June, 2016

Offering a low maintenance solution for the creation of continuous vacuum or pressure, claw pumps from EuroVacuum Products are claimed to present an ideal selection for a wide range of industrial applications. Equipped with variable speed drives, combined with innate design benefits for reliable operation, claw pumps adhere to the stringencies of even corrosive environments.

IMI Bopp & Reuther launches improved freeware to aid valve selection

10 June, 2016

IMI Bopp & Reuther – a business of IMI Critical Engineering, provider of critical flow control solutions – has launched the latest version of its free-to-use software tool, Si-Tech. Si-Tech 4.0 is a state-of-the-art application that helps users to size and select safety valves, and is available for download to all customers and partners of the company.

Bespoke plate heat exchangers in seven days

10 June, 2016

Assembled from stocked components, the exclusive BOSS i-Series of plate heat exchangers (PHE) from BSS – the UK distributor of heating and pipeline products and services – are built to order so that fully assembled and tested units can be supplied within seven working days of order.