Telescopic cylinders for industrial lifts in confined spaces

10 April, 2019

Enerpac has introduced the RLT-Series range of low-height telescopic hydraulic cylinders for applications requiring a long cylinder stroke in confined spaces commonly found during machinery positioning and tool fastening. With a lifting capacity of 4.4 to 74.1 ton, the low-height cylinders are available with two or three pistons and can lift loads up to 40 mm (1.57 in.) in a single movement.

Trelleborg showcases sealing solutions at subsea event

04 April, 2019

Cutting-edge solutions for high-integrity sealing applications developed by Trelleborg Sealing Solutions were recently showcased at Subsea Expo in Aberdeen (5 to 7 February), the annual subsea exhibition and conference.

Base oil for ‘sustainable mobility and a cleaner future’

02 April, 2019

Petronas Lubricants International (PLI) has unveiled its base oil ETRO+, the next evolution in Group III base oils. An improvement from the existing ETRO brand, ETRO+ is a Group III+ base oil that promotes fuel efficiency and the reduction of CO2 emissions.

Atos unveils new range of hydraulic filters

28 March, 2019

After 60 years’ experience in the design and manufacture of a wide range of high-performance electrohydraulic products and systems – digital proportionals & electronics, conventional valves, cylinders and Servoactuators – Atos has now developed a new range of quality hydraulic filters, equipped with high-efficiency filtering elements and engineered with inorganic microfibres to ensure β×(c) > 1000 for all filtration ratings.

Hydrotechnik UK launches HTUK Watchlog

26 March, 2019

Hydrotechnik has launched a new Wireless Data Monitoring and Acquisition system, designed for continuous measurement and monitoring of critical machinery, processes and systems.

High-performance hose provides secure supply to Hexapod drives

22 March, 2019

Dynamic movements in drive cylinder in all six degrees of freedom, test frequency of up to 100 hertz, a tight installation area: installing hydraulic hoses in Hexapod test benches to be used by automotive manufacturers to test suspension elements is a challenge. Oelhydraulik Hagenbuch AG therefore uses flexible high- performance hoses from Eaton's Aeroquip Triple Crown product range.

Pearson Hydraulics acquires P&R Hydraulics

15 March, 2019

Pearson Hydraulics Ltd has acquired P&R Hydraulics for an undisclosed sum.

Enerpac launches ZC-Series cordless pumps

15 March, 2019

High-pressure hydraulic tools specialist, Enerpac, has introduced the ZC-Series cordless hydraulic pump combining the performance of an electric pump with the convenience and portability of a battery pump.

New role, familiar face at Albion Valves

08 March, 2019

It looks like second time around is proving to be a positive move for Pete McGrath as he re-joins Albion Valves – the supplier of commercial valves and fittings – in the newly created position of national contracts manager.

KTR UK welcomes new national distribution manager

08 March, 2019

Power transmission component manufacturer KTR UK has appointed Mark Humphrey as its new business development manager in charge of Distribution.

Next generation servo motors boost torque by 30%

08 March, 2019

New from Inmoco is the next generation of servo motors made by Kollmorgen, offering high-level performance with a compact footprint.

MP Filtri UK launches new range of ATEX indicators

28 February, 2019

MP Filtri has launched its new DEH series of ATEX clogging indicators.

Zeus flies high with Concorde project

15 February, 2019

Concorde celebrates 50 years since its first flight from Filton in April 2019. With this milestone in sight, Aerospace Bristol decided to bring the iconic droop nose back to life for all to see.

UBM 6-20 pipe bender from Uniflex

14 February, 2019

The new UBM 6-20 from Uniflex bends pipes up to 20 mm in diameter in an easy way at a reasonable price.

Albion building upon the success of stainless steel fittings

13 February, 2019

Albion Valves (UK) Ltd, the supplier of valves to the industrial and building services markets, was one of the first companies in the UK to introduce a range of stainless steel fittings compliant with the ISO 4144 Standard, which specifies the pressure, temperature ratings and dimensions of this product group.