Piezo-resistive pressure transducers from Variohm EuroSensor
As a designer and manufacturer of measurement sensor components and a distribution partner for other sensor suppliers, Variohm EuroSensor offers a wide range of pressure transducers that find widespread use for measurement and monitoring tasks in industrial machinery, medical equipment, science and research projects, automotive engineering and test and many other areas.
Detect and localise leaks in brake systems
To ensure safety on the tracks, the maintenance technicians pay special attention to the braking system. The centralised pneumatic brake system is used to keep pressure on the system continuously and to ensure the brake shoes remain open. As soon as the pressure drops, the brakes engage and start causing undesired friction on the axles. A tricky, tiny leak in the compressed air system can lead to system malfunctions, which activate the brakes. These errors must be corrected as soon as possible.
Mastering fluid power efficiency with industrial IoT
By Jeremy Drury , vice president, IoT Diagnostics
The digital transformation journey – don’t run before you can walk
January’s online Talking Industry panel discussion addressed issues surrounding digital data capture, the use of artificial intelligence (AI) and better communication practices etc through deploying concepts and strategies related to the industrial network of things (IIoT) and Industry 4.0.
Remote commissioning of equipment allows installation during Covid-19
Normally the supply, installation and commissioning of a heat exchanger to sterilise food ingredients such as wort would be a relatively straightforward exercise, with HRS project engineers travelling from their bases in Spain or the UK to the client’s location. However, the travel and operation restrictions imposed globally by the Coronavirus pandemic earlier this year meant that a different approach was required for one HRS MI Series installation in the United States.
Acrovision chooses Micro-Epsilon thermal imaging camera fever screening system
Acrovision, a UK-based systems integrator of factory and warehouse automation, vision inspection systems and direct part marking and identification technologies, has chosen the thermoIMAGER TIM QVGA-HD-T100 thermal imaging camera from Micro-Epsilon as part of its infrared thermal detection system, the AFS-100. The system provides end users with a reliable, versatile, high accuracy fever screening system to help prevent the spread of the coronavirus (COVID-19). The thermal imaging camera was selected due to its high accuracy and ease of integration, set up and configuration.
Precision mixing contains costs for product development
A pre-pilot mixing plant is using wireless TorqSense transducers for ultra-accurate viscosity measurement of high-value compounds. The plant is used to prepare small batches of compounds from shampoo and detergent to cosmetics, therapeutic and medical preparations. Some of the ingredients in the compounds are very expensive, so product developers are loath to make large batches early in the formulation process.
Bürkert’s new mass flow controller for low volume achieves high accuracy with any liquid
A new mass flow controller/meter (MFC/M) is providing high precision and repeatability for small quantities of virtually any liquid. The Bürkert Type 8756 achieves accurate control or measurement, thanks to its Coriolis sensor, which enhances stability and removes the requirement for zero-point adjustment in changing process conditions.
Sensata Technologies introduces high-accuracy hermatic pressure sensors
Sensata Technologies, the industrial technology company and provider of sensors, has launched the new PTE7100 and PTE7300 hermetic pressure sensors for industrial applications with mid and high-pressure ranges.
TF Automation designs plasma treat machines for automotive firm
TF Automation was commissioned by Kostal Automotive Electrical Systems to design and build two plasma treat machines to address the increase in demand for cleaning new automotive switch products.
Air Bleed Oriface improves efficiencies
In today’s environment technology is constantly pushing for improved system efficiencies and industrial hydraulic systems is a good example of this where reduced weight and size of components and increased system pressures are often among the key requirements.
Discover the full potential of servo drives with the Festo developer kit
A new developer kit from Festo enables system designers and machine builders to familiarise themselves with the functions and application possibilities of the company’s CMMT servo drives.
Industry 4.0 ready valve island to simplify preventative maintenance
Being fully equipped for smart manufacturing whilst also delivering outstanding price efficiency, were key factors in the development of Camozzi Automation’s new Series D Valve Island, which is Industry 4.0 ready thanks to Camozzi’s futuristic CoilVision innovation.
New wireless sensors enable automated machine monitoring for reliable rotation in heavy industries
SKF has released a compact and cost-effective vibration and temperature sensor for monitoring the condition of rotating parts on heavy industrial machinery. Designed principally for use as part of an SKF Rotating Equipment Performance (REP) solution, the sensor – called the SKF Enlight Collect IMx-1 – enables customers to reduce both expensive unplanned downtime and their maintenance costs.
Zyfra launches remote industrial IoT system for machines
In context of the ongoing coronavirus (COVID-19) pandemic raging globally, Zyfra, Finnish-Russian industrial digitalisation firm, has released a cloud-based version of its MDCplus real-time machine monitoring and manufacturing data collection system designed for the industrial facilities to remotely monitor CNC machines.
-
SMART Manufacturing & Engineering Week
04 - 05 June, 2025
NEC, Birmingham UK -
PPMA 2025
23 September, 2025, 9:30 - 25 September, 2025, 16:00
NEC, Birmingham UK -
Advanced Engineering Show 2025
29 October, 2025, 9:00 - 30 October, 2025, 16:00
NEC, Birmingham UK
