20 October, 2020

TF Automation designs plasma treat machines for automotive firm

12 October, 2020

TF Automation was commissioned by Kostal Automotive Electrical Systems to design and build two plasma treat machines to address the increase in demand for cleaning new automotive switch products.


Kostal asked TF Automation to design two identical plasma treat machines to clean the surfaces of a switch assembly. Under the touch sensitive switch or button there is a capacitive foil and to ensure good performance the bonding between the switch and foil is critical with no moisture or air bubbles. To prepare the switch for capacitive foil bonding, the plastic elements required to be plasma-cleaned to remove any moisture and impurities.

Plasma pre-treatment is the key enabler technology for microfine cleaning, surface activation and plasma coating of nearly all kinds of materials. Conventional industrial pre-treatment methods are being replaced by plasma technology to make processes more effective and environmentally friendly.

TF Automation manufactured the two plasma treat machines to automatically clean and prepare the inner surfaces of the automotive switches. Both machines accept 6 variants; however, they are programmed to accommodate many more variants, if required. The operator places two component parts into nests on a sliding drawer which is then closed. The drawer is automatically locked which seals the plasma cleaning area and protects the operator. The plasma cleaning of both switches is carried out, allowing the operator to perform other tasks, as required. Once cleaning is complete, the operator then removes the switches and repeats the operation.

The change-over from one variant to another is simple with quick change nests selected from the menu on the HMI screen. The nests are fully poka-yoked sensed if variants are selected in error, the machine prompts the operator.

The plasma head is mounted on to a 3-axis servo cartesian gantry and when the operator chooses a variant on the HMI, the correct plasma path is automatically selected. The plasma jet is guided with a defined speed and distance over the surface of the component prior to bonding. As the jet rotates, the plasma provides uniform treatment over a wider area than a non-rotational jet. The treatment is made by a potential-free plasma flume that exits the nozzle at an angle.

www.tfautomation.co.uk.




Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
September 2020To view a digital copy of the SEPTEMBER 2020 issue of Hydraulics & Pneumatics Magazine, click here.

July/August 2020 Annual Buyers' GuideTo view a digital copy of the July/August issue of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

June 2020 Issue To view a digital copy of the June edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

BFPA YearbookTo read the latest BFPA Yearbook, click here
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe JournalOEE
Talking Industry
Super Swivels
Impulse Automation Limited was established in 1960 and is based in the United Kingdom. We are an importer and distributor of mechatronic components used in a wide variety of industry sectors.Impulse Automation Limited
IndequipWEB LOCATOR
Hy-Pro FiltrationWEB LOCATOR
PrimaryWEB LOCATOR
Newsletter
 
Newsletter