Updated fixed-speed compressor range for greater efficiency

22 September, 2016

Atlas Copco has upgraded its 30 to 45 kW range of fixed-speed oil-injected rotary screw compressors to offer a smaller footprint, lower noise and a more compact design.

New compressor unit for E-buses and commercial vehicles

22 September, 2016

At the IAA Commercial Vehicle Show this month (Hall 25, Stand C50), Gardner Denver Transport is concentrating on innovative solutions for equipping local transport and commercial vehicles with auxiliary units.

SKF bearings help Lontra compressor reduce energy consumption by over 20 per cent

17 August, 2016

A new compressed air system is using SKF tapered roller bearings, which are helping to keep energy, carbon dioxide and noise emissions to a minimum.

Atlas Copco expands GA VSD+ compressor range

17 August, 2016

Atlas Copco is expanding its range of GA VSD+ compressors with a series of extra models that deliver unsurpassed efficiency in a space-saving upright format. Building on the success of the GA 7-37 VSD+ oil-injected rotary screw compressors, which ushered in next-generation variable speed drive technology when launched in 2013, Atlas Copco is extending that range up to 75 kW to give more industrial air users the option of having an energy saving VSD+ model.

Gardner Denver unveils latest Robuschi compressor for pneumatic conveying systems

17 August, 2016

Gardner Denver has unveiled the latest technological update to the Robuschi compressor range, specifically developed for industrial plants requiring a low-pressure solution for pneumatic conveying systems.

Boge compressor cleans up fossils at multi-million pound Jurassic museum

17 August, 2016

Industrial air compressor manufacturer Boge has supplied one of its high-quality, fully featured compressed air stations for an unusual application at a multi-million-Pound museum on Dorset’s Jurassic coast.

Notre Dame organ hits the right note with Jun-Air compressor

17 August, 2016

Mention Gast Group and its Jun-Air range, and you’d be forgiven for thinking of air compressors that are perhaps best known for being specified for industrial, process, pharmaceutical, laboratory or dental applications.

Prevost launches new range of prevoS1 blow guns

10 June, 2016

Prevost has introduced an extensive new range of blow guns with built-in adaptors.

Atlas Copco extends range of GHS VSD+ vacuum pumps to 1900 m³/h

10 June, 2016

Atlas Copco has extended its portfolio of GHS VSD+ vacuum pumps with the launch of a new model offering power of up to 1900 m3/h while retaining the high level of energy efficiency that has been a hallmark of the range. The new GHS 1300-1900 VSD+ is built upon the success of the GHS 350-900 VSD+, which set a new benchmark for vacuum pumps when it was introduced in 2015.

New generation of adsorption dryers from Beko Technologies

10 June, 2016

Beko Technologies has introduced its latest generation of the Drypoint AC compressed air adsorption dryers. These models come in 10 different sizes for volumetric flow rates from 100 to 1000 m³/h and operating pressures from 4 to 16 bar (gauge). The cold-regenerated adsorption dryers extract moisture from the compressed air to a pressure dew point of -40degC.

Jaguar Land Rover gears up for compressor efficiency at new engine manufacturing centre

10 June, 2016

When it came to selecting the compressed air system for its brand new, Engine Manufacturing Centre (EMC) in Wolverhampton, Jaguar Land Rover selected supplier Gardner Denver to provide a solution capable of high energy efficiency, low cost of ownership and reduced environmental impact.

Boge publishes new guide to oil-free compressed air

10 June, 2016

Boge Compressors, the supplier of industrial compressed air systems, has published a comprehensive new guide to oil-free compressed air. It explains the key differences between types of air compressors, as well as the important factors that should be considered for the reliable production of absolutely 100 per cent oil-free compressed air.

Designed-in-safety: new two-hand control unit from IMI Precision Engineering

10 June, 2016

Aimed at preventing the accidental operation of safety-critical compressed air machinery, IMI Precision Engineering has introduced an advanced two-hand control unit which meets the requirements of the Machinery Directive through compliance with EN574 Safety of Machinery – Two Hand Control Devices (class IIIB).

Beko Technologies can measure to ISO standards 8573-1 class 1

29 April, 2016

Beko Technologies can now measure compressed air to ISO 8573-1 class 1 of the ISO standards. This is extremely important for industries such as food & beverage, pharmaceutical, medical, automotive and many more.

Atlas Copco helps Tensar save energy and reduce CO2 impact

29 April, 2016

Tensar International, the technology-driven solutions provider for ground stabilisation and soil reinforcement, is predicted to save over £22,000 in annual energy costs and achieve a 141 tonne reduction in its carbon footprint after installing an energy efficient compressed air system from Atlas Copco.