Atlas Copco aims to boost on-site nitrogen generation with NGP+
Atlas Copco has launched the NGP+ on-site nitrogen generator. According to the company, NGP+ can be simply plugged into an existing compressed air network to produce nitrogen of up to 99.999 per cent purity. Atlas Copco adds that when combined with its latest energy efficient compressors, an on-site nitrogen installation including the NGP+ generator can offer significant benefits compared with reliance on nitrogen from cylinders.
Beverage firm slashes compressed air consumption by 45 per cent
Air blowing activities consume almost half of all compressed air used in plants, an often unrecognised burden on a business’s resources. However, Hangzhou Hongsheng Beverage Group has seen a substantial 45 per cent reduction in compressed air consumption due to a new air saving solution.
Gast Group launches rocking piston-based Jun-Air systems
Gast Group – the designer and manufacturer of precision air products and member of IDEX Corporation’s Health & Science Technologies division – has launched 86/87R Series Systems, a brand new Jun-Air range of oil-less rocking piston-based compressed air systems.
A bright future
Trevor Davison, chairman of TFG Group, Gardner Denver’s largest, independent distributor and the biggest distributor of compressed air products in the UK, explores what the future holds for today’s engineering product distributors and shares his thoughts on how investing in skills and training now, will pay dividends in the long term.
Thermo Kit aimed at boosting compressor energy recovery
Atlas Copco is aiming to rapidly increase the adoption of compressor energy recovery with the launch of an all-in-one kit that simplifies integration with a building’s central heating and hot water system. The revolutionary Thermo Kit is a complete package of energy recovery components that can be installed quickly and easily to provide the user with a highly efficient source of supplementary hot water at no additional cost.
Towable compressors are compact, powerful and energy efficient
Providing a dependable, efficient and environmentally-friendly source of quality compressed air in a compact, towable unit are the important benefits of two new portable compressors introduced by HPC Kaeser. Compact and simple to operate, the M114 and M115 portable compressors are both powered by 85kW engines and deliver similar free air deliveries up to 9.7 m³/min (342 cfm) at 10 bar.
Boge saves €60k for leading packaging provider
A world-leading paper-based packaging company has made significant cuts in costs by installing a Boge SLF 125 compressor. The company has estimated that at least €60k per annum is being saved in energy consumption and maintenance since installation.
Training with Beko Technologies
Beko Technologies is offering training days to give people an opportunity to increase their knowledge on a variety of topics including oil-free air, measurement technology, air treatment, condensate management – plus up and coming new products from Beko.
CompAir compressors ensure maximum productivity for TT Solutions & Interiors
TT Solutions & Interiors Ltd., a manufacturer of bespoke and modular furniture, is experiencing greater production reliability thanks to a compressed air system supplied by Gardner Denver (CompAir) distributor, BCAS Limited.
Holroyd at China Refrigeration 2015
Holroyd Precision Components will be showcasing its screw and compressor rotor design, prototyping and manufacturing capabilities at China Refrigeration 2015 – the International Exhibition for Refrigeration, Air-conditioning, Heating and Ventilation – to be held from 8th – 10th April at Shanghai New International Expo Centre.
Chicago Pneumatic launches new portable compressors in Europe
International construction equipment manufacturer Chicago Pneumatic has introduced new versions of its CPS 11.0 (7 bar) and CPS 11-12 (12 bar) portable compressors for the European market. The powerful compressors feature EU compliant Stage 3B engines and a new electronic control panel which is said to make them easy for users to operate, monitor and service.
Metpoint OCV makes the quality of compressed air visible
Metpoint OCV offers precision measurement technology for all industrial sectors, where compressed air plays an important part in the production process and real-time monitoring of compressed air quality is process critical. Even ‘oil-free’ components are no guarantor for ‘oil-free’ compressed air, ambient air/ intake air have a big impact on achieving oil free air. In most cases, a certain residual oil content cannot be entirely avoided in standard applications. Therefore, more precise monitoring of the oil vapour content, which is possible at any time is important. Crucial factor Especially in critical production processes of the chemical and pharmaceutical industry, in food production and surface engineering, the analysis, validation and control of compressed-air quality is a crucial factor. The Metpoint OCV continuously monitors and documents the residual oil content of the flowing compressed air. Even the smallest amounts of oil in the compressed-air will be detected and reliably determined. Time-intensive sampling and costly laboratory analyses are no longer required. The provided data gives early notice on the possible contamination of pipework and products. When critical points are reached in the system, the user is will be able to react immediately to deviations in a proactive manner. The Metpoint OCV thus helps prevent damage to machines and plant, avoids high repair and reject costs and, not least, damage to products and therefore consumer confidence. Key advantages According to Beko Technologies, key advantages of Metpoint OCV include: • Measurement of the residual oil content down to ranges of mere thousandths of mg/m³. • TÜV-certified system in accordance with ISO 8573. • Continuous monitoring, 24/7 process reliability. • High data precision. • Direct indication of deviations, short reaction times. • Network-compatible, with touchscreen display. • Pay back usually within the first year. www.beko-technologies.co.ukMark MSM compressor aids disabled engineering solutions unit
MERU produces a range of disability equipment solutions to meet individual needs. There are many ‘off the shelf’ items in the catalogue, however MERU specialises in the design and build of bespoke equipment for children. While upgrading its production facility, the organisation required an improved compressed air set-up, which led it to Mark Compressors’ Full Feature unit. The installation of a new CNC machine at MERU’s Epsom design offices and workshops, replacing the existing lathes for the milling of metal parts, meant that the quality of air supplied by the old, struggling, piston compressor was just not good enough for the new demands. “The CNC machine needs pure, dry air to operate it,” said Gary Scarlett, chief design engineer and facilities manager. “Therefore, we looked for a compressor and dryer combination which could provide that need.” At the same time it was decided to completely re-spec the compressor to fulfil a number of new requirements. The air-output capacity needed to be increased because there would now be occasions when the CNC machine would be running at the same time as a sandblaster and other air tools. Certain plastic-moulded parts require that there is no moisture contamination and so, once again, the need for dry air was paramount. While 7-8 bar is the constant pressure needed, it was decided to go for a machine with a capacity of 10 bar to cover any contingency situations. The arrival of the CNC machine meant a need for continuous air supply, so reliability became a key issue, since any interruption to the air supply would mean a complete re-set of the task programmed into the CNC. All these points were coupled with a need for a quieter machine, while still retaining a small footprint to suit the area where it was to be located. After looking into a number of options, Scarlett and his team opted for a Mark MSM 4kW DX compressor, including a dryer, integrated as a receiver-mounted combination. This fulfilled all the requirements, giving 100 per cent dry air and a noise level as low as 62 dB(A). As one member of the team remarked, “Compared to the old banging piston machine, we hardly know the Mark compressor is running. It’s a real joy not to have that thumping sound in the corner of our otherwise quiet workshops.” In addition to the specialist design engineering team, the workforce at Epsom is supplemented by both engineering students on work-experience placements and a number of volunteers. MERU was founded in 1973 as a charity by William Bond, a senior lecturer in design engineering, and Trefor Llewelyn- Bowen, consultant orthopaedic surgeon, who were both concerned at the lack of clinical facilities that could provide equipment for disabled children. They saw that some children have disabilities so complex that no available ‘off-the-shelf’ equipment met their needs. Working towards providing answers to these problems is still the driving vision at MERU and the organisation works closely in consultation with medical teams, considering individual cases and providing products to meet each specific brief. The result has seen some extremely innovative solutions, among them a powered indoor chair called Bugzi. This allows the severely disabled to move themselves around at an early age, substituting the equivalent of movement that a child would normally have at the crawling or early walking stages of development. Bugzi is one of the main products in evidence when touring the production facility, and it was to meet the demand for increased numbers of chairs that led to the installing of this new range of equipment. However, many other important items have been developed by the team, including travel seats for use on aircraft, arm guards, grab bars and flexible gadget stands, which allow perfect positioning of a device, such as a phone or iPad. www.markcompressors.comChicago Pneumatic launches new portable compressors in Europe
International construction equipment manufacturer Chicago Pneumatic has introduced new versions of its CPS 11.0 (7 bar) and CPS 11-12 (12 bar) portable compressors for the European market. The powerful compressors feature EU compliant Stage 3B engines and a new electronic control panel which is said to make them easy for users to operate, monitor and service. Built for tough construction and maintenance applications, the CPS 11.0 and CPS 11-12 portable compressors are perfect for surface drilling, abrasive blasting and ice blasting, and excel in road work and shotcrete pumping. The 12-bar variant is also suitable for special applications such as fibre optic cabling, with the higher working pressure enabling the CPS 11-12 compressor to push cabling through longer pipeline distances without incurring pressure loss. Deutz engines The CPS 11.0 and CPS 11-12 compressors feature new Deutz engines which are fully compliant with EU Stage 3B emission standards. The compressors’ powerful engine uses Exhaust Gas Recirculation technology in combination with a Diesel Oxidation Catalyst and, for the CPS 11-12 a Diesel Particulate Filter, to sharply reduce the output of particulate matter and nitrogen oxides. As a result, the CPS 11.0 and CPS 11-12 are more environmentally friendly than previous models and provide operators with the benefit of increased fuel efficiency at partial load. Central controller Another major new feature is the easy-to-use central electronic controller thatprovides operators with an improved user interface and straight forward control and monitoring options. The electronic controls also make it easy for operators to quickly start and stop the compressor and regulate automatic cool-down after the unit has been running at full load. With large 175 litre fuel tanks the CPS 11.0 and CPS 11-12 compressors provide operators with outstanding fuel autonomy that enables the compressors to be run non-stop at full load for an entire shift without refueling. A fully automatic step-less speed regulator also means the engine speed can be adapted to air demand. Additional options include a braked undercarriage with a fixed or height adjustable tow bar, a non-braked undercarriage with fixed tow bar, jockey wheel, leg support and several towing eye options. www.cp.comCompAir helps robot band take to the stage
A CompAir compressor supplied by BCAS Limited. has helped a band made up of three, 5ft tall robots take to the stage at a recent festival in London. The band’s members are all built out of scrap metal and are controlled by electro-pneumatics. Some of the most popular tracks performed by the band have been viewed more than 6.3 million times on YouTube. Constant flow of air The 11kW compressor supplied by BCAS Limited, a distributor of Gardner Denver products including the CompAir brand, provided a constant flow of compressed air to the band throughout their performance at the festival. Louisa O’Connor, senior project manager at creative production company, DesignScene, which designed and produced a bespoke structure for the London festival, commented: “Without compressed air none of the robots in the band can perform, so it was vital that the compressor we used could provide a constant flow of air. BCAS Limited supplied and installed the compressor on time, with the CompAir unit performing reliably throughout, ensuring the band could entertain the tens of thousands of fans who attended the three day festival.” The new design of the high efficiency air end in the CompAir L11 compressor operates at low rotational speeds, resulting in lower energy costs, whilst the unit’s IP55 motor provides operational reliability. Designed to pass through a standard doorway, the L11 is simple to install and low noise levels mean the compressor can be located close to the application. The L11’s integrated design, with oil separation, oil filter and thermostatic bypass valve also reduces the number of external hoses and components, resulting in increased reliability. www.compair.com
-
LAMMA Show 2025
15 January, 2025, 8:30 - 16 January, 2025, 16:30
NEC, Birmingham UK -
SOUTHERN MANUFACTURING & ELECTRONICS SHOW 2025
04 February, 2025, 9:30 - 06 February, 2025, 15:30
Farnborough International Exhibition Centre, off Aerospace Boulevard, Farnborough GU14 6TQ -
SMART Manufacturing & Engineering Week
04 - 05 June, 2025
NEC, Birmingham UK -
PPMA 2025
23 September, 2025, 9:30 - 25 September, 2025, 16:00
NEC, Birmingham UK
