2 December, 2024

Optimising filtration solutions: Enhancing quality and reliability

22 September, 2023

MacFab Engineering, based in County Monagham, has established itself as a prominent figure in the recycling and refuse compaction industry. With a specialisation in recyclable waste balers and compactors, the company says it has always prioritised delivering top-quality products to its customers.


As MacFab Engineering transitioned from manual to automated machines and took on the task of manufacturing key components in-house, it encountered some challenges. During the development of prototype machines, the hydraulic drive system exhibited irregularities, stemming from the shift from manual hydraulic valves to electronically controlled ones. In search of solutions, MacFab turned to MP Filtri, an expert in addressing oil and system cleanliness.

MP Filtri took an active role in addressing MacFab's challenge. It conducted a thorough site visit to gain detailed insights into MacFab's operations. To pinpoint the root causes, MP Filtri connected an LPA3 particle counter directly onto a prototype machine situated in MacFab's testing area. Analysis of the oil's ISO code exposed contamination levels exceeding its strict limits. MP Filtri introduced a 6-micron absolute filter, leading to a significant improvement in oil cleanliness. This was circulating oil that only included the pump, valve assembly, tank, and hoses.

In addition, MP Filtri and MacFab looked at the valve block's cleaning processes. Once consistent levels of cleanliness were achieved, they proceeded to test a second prototype. The LPA3 was again used to measure oil cleanliness. On start up the ISO code was noticeably cleaner and using a 6-micron filter to clean the machine proved vital. Once the oil was clean and at working temperature, MacFab ran further tests than included moving the ram. The ISO count quickly went above recommended level. It was slow to clean with the 6-micron filter. The only major component not previously tested was the ram and associated hoses.

Through concerted efforts, they improved the cleaning procedure on the ram and retested a batch of machines. These proved to be clean with zero failures in the field.

These notable advancements prompted MacFab to establish stringent cleanliness protocols within its factory.

Each machine is cleaned using a special filter and the cleanliness code is recorded for traceability. It has also manufactured its own oil scrubber unit with an ICM inline particle counter to ensure clean oil is added to all new assemblies.

Each machine now undergoes meticulous cleaning, complete with traceability of cleanliness codes. Furthermore, MacFab designed its own oil scrubber unit, incorporating an ICM inline particle counter to ensure pristine oil in all new assemblies.

To validate cleanliness during the testing phase, MacFab purchased the LPA3 - each machine must succeed in achieving its cleanliness target at final testing before it is dispatched to the customer.

The multifaceted solutions implemented in partnership with MP Filtri have yielded significant results:




Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
OCTOBER 2024 IssueTo view a digital copy of the OCTOBER 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

SEPTEMBER 2024 IssueTo view a digital copy of the SEPTEMBER 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JULY/AUGUST 2024To view a digital copy of the JULY/AUGUST 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

BFPA YearbookTo read the latest BFPA Yearbook, click here ..
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe Journal
Newsletter
 
Newsletter