30 October, 2020

New generation of adsorption dryers from Beko Technologies

10 June, 2016

Beko Technologies has introduced its latest generation of the Drypoint AC compressed air adsorption dryers. These models come in 10 different sizes for volumetric flow rates from 100 to 1000 m³/h and operating pressures from 4 to 16 bar (gauge). The cold-regenerated adsorption dryers extract moisture from the compressed air to a pressure dew point of -40degC.


The cold-regenerated Drypoint AC adsorption dryers ensure a continuous supply of high-quality air. They are equipped with an efficient compressor synchronisation controller as standard, saving energy. If the compressor is not running, the dryer is also shut down, preventing unnecessary air purging.

The containers of the Drypoint AC are filled with activated alumina desiccant. Beko Technologies comments that the shuttle valve with an internal purge air line allows for an adequate air flow even in the event of a power failure.

Designed with practicability in mind

Sturdy galvanised press fittings, easy transport by means of a lift truck and access to all system components show that the unit has been designed with practicability in mind. The regeneration air flow is determined by the operating pressure and cannot be adjusted. The regeneration air is released through top quality silencers to the ambient air.

The dryer is shipped with a fully mounted Clearpoint prefilter to remove solid and liquid contaminants. The Clearpoint afterfilter ensures that the downstream compressed air system cannot become contaminated with desiccant abrasion residue. The condensate is drained off through a Bekomat. Like all Beko Technologies products, the Drypoint AC is easy to operate.

Apart from the standard models, the dryer can be customised for pressure dew points of as low as -70degC. For such units, the air is dried by molecular sieves. The Drypoint AC can be upgraded with a pressure dew point control system that includes Metpoint sensor technology from Beko Technologies, reducing energy consumption even further.

www.beko-technologies.co.uk




Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
OCTOBER 2020 Issue To view a digital copy of the OCTOBER edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

September 2020To view a digital copy of the SEPTEMBER 2020 issue of Hydraulics & Pneumatics Magazine, click here.

July/August 2020 Annual Buyers' GuideTo view a digital copy of the July/August issue of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

BFPA YearbookTo read the latest BFPA Yearbook, click here
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe JournalOEE
Super Swivels
Impulse Automation Limited was established in 1960 and is based in the United Kingdom. We are an importer and distributor of mechatronic components used in a wide variety of industry sectors.Impulse Automation Limited
IndequipWEB LOCATOR
Hy-Pro FiltrationWEB LOCATOR
PrimaryWEB LOCATOR
Newsletter
 
Newsletter