26 February, 2020

Sourcing the correct metal hose

30 October, 2015

Fittings – End fittings are selected based on the mating fittings and the chemical compatibility with your application. You must also make certain that the end fitting pressure ratings, as well as those of the hose, exceed the required pressure rating of the application. Because applications vary widely, various end fittings can be welded together to make combinations to meet virtually any application needs. Contact us for these customer applications.

Length – How to select the proper length of a metal hose assembly:

• Properly design the application, do not pipe it first and buy a hose to fit.

• Never torque a hose or bend it in more than one plane.

• Never bend the hose tighter than its published bend radius.

• Never compress the hose from end to end.

• Install it correctly using the guidelines at: http://processhose.com/pdf/Hosemaster-Installation-metal-hose.pdf

• Use information at the following link to select the proper length: http://processhose.com/pdf/Hosemaster-metal-hose-length-considerations.pdf

As a Hose Master Factory Authorised Fabricating Distributor, TMS Group fabricates its flexible metal hose assemblies to the standards set forth by both NAHAD and the Hose Master Factory. All TMS’s fabricators have been fully trained, tested and approved to fabricate assemblies by the Hose Master factory.

www.flexiblemetallichoses.com




Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
Latest Issue To view a digital copy of the latest issue of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

Previous IssueTo view a digital copy of the NOVEMBER/DECEMBER 2019 issue of Hydraulics & Pneumatics Magazine, click here.

Buyers Guide - July/August Issue 2019To view a digital copy of the Buyers' Guide 2019 issue of Hydraulics & Pneumatics Magazine, click here.

July/August 2019 Annual Buyers Guide Issue
BFPA YearbookTo read the latest BFPA Yearbook, click here
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Smart Machines & FactoriesSmart Machines & Factories Magazine - the UK's first dedicated journal focusing on the fourth industrial revolution and transforming to a smart manufacturing era.
Airtech Exhibition 2020
Fluid Power & Systems 2020
Offshore Europe JournalOEE
Plant & Asset Management 2020
Super Swivels
IndequipWEB LOCATOR
Hy-Pro FiltrationWEB LOCATOR
PrimaryWEB LOCATOR
Newsletter
 
Newsletter