Uniflex UVC 50: Clean air in service workshops

30 June, 2022

The multi-step exhaust air purification runs with a spark stop function, cyclone filter technology for the pre-separation of coarse particles, particle filter for dust, HEPA filter for fine particles and carbon filter for odour neutralisation – and all that with two full years of Uniflex manufacturer’s warranty (except wear parts like filters, etc.).

The wheel-equipped devices with a basic footprint of 118 x 70 cm are 88 cm in height and weigh approximately 150 kg – incl. a 10-litre dust collection container. With a maximum volume flow of 700 m3/h and an extremely high negative pressure of up to 3250 Pa, the Uniflex UVC 50 has an easy-to-clean, easy-to-exchange main filter surface of 5 m2. Based on an intake voltage of 400 V, the device offers 1.9 kW of drive power. Of course, the Uniflex UVC 50 can also be connected to other suitable machines that require high-performance suction. Suitable devices should have an intake diameter of 60-120 mm. The suction and filter performance increases with the size of the diameter.

As with all devices and machines from Uniflex, you get a two-year manufacturer`s warranty on the Uniflex UVC 50, excluding wear parts, such as filters, etc. as well as any damage caused by improper use or faulty connection to devices/cutters from other manufacturers.

www.uniflex.de

https://www.linkedin.com/company/uniflex-hydraulik-gmbh/