4 December, 2024

Peak-performing refrigerant dryer from Boge

22 March, 2017

Boge has unveiled its new efficient refrigerant dryer, the DS2. The unit features power consumption up to 20% lower than other models in the DS series together with a high flow rate.


Boge reports that it has reduced the R134a refrigerant charge required by 25%. This substantially reduces the risk of damage due to liquid refrigerant returns and means there is no need to pre-heat the dryer.

The DS2 refrigerated dryer works by passing cooled air through a heat exchanger made of an air-to-air section and an air-to-refrigerant section. The refrigerant circuit is self-regulating, depending on the air load and an expansion valve regulates all models up to 10 m³/min.

In its standard configuration, the refrigerant compressor is always in operation when the dryer is switched on and, in the optional ‘energy save’ configuration, the compressor cycles at partial compressed air load.

The DS2 features a dual-frequency hermetic piston for high performance, and its digital controller includes free alarm contact and service reminder. A newly designed aluminium heat exchanger is claimed to further improve performance.

Easier maintenance

For easier maintenance, the DS2 has a drain niche with access from both sides and removable panels. A digital display comes as standard as does dual frequency (50/60Hz), making the DS2 suitable for worldwide use.

Options include an energy saving version (on models from 2.6 to 10m³/min). Energy saving models are equipped with a different controller and a modified fridge circuit. Cold energy stored in the aluminium mass of the heat exchanger can be used to cool partial flows when the dryer works with variable load at lower than the nominal capacity. It also allows the fridge compressor to be stopped for some time intervals, saving energy.

As well as the energy saving model, other options include an electronic capacitive drain, bypass and pre-filter making the DS2 incredibly versatile for a wide range of applications. The pressure range of the 12-model DS2 is 3-16 bar and the flow range is 0.4 to 10 m³/min.

In addition, the DS2 range is being offered with a best in class free warranty gift of 36 months.

www.boge.co.uk




Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
OCTOBER 2024 IssueTo view a digital copy of the OCTOBER 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

SEPTEMBER 2024 IssueTo view a digital copy of the SEPTEMBER 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JULY/AUGUST 2024To view a digital copy of the JULY/AUGUST 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

BFPA YearbookTo read the latest BFPA Yearbook, click here ..
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe Journal
Newsletter
 
Newsletter