7 July, 2022

Taking the strain: anti-vibration specification for industry

17 August, 2016

Anti-vibration mounts protect both people and assets by isolating and attenuating vibration and noise, preventing damage to both moving machinery and the environment in which it works. Optimum performance service life is however only guaranteed if the mount is both specified and installed correctly. Geert Keustermans, market manager – general industry and distribution at Trelleborg’s industrial antivibration solutions operation, looks at the best-practice process for selecting and fitting anti-vibration mounts.

With such a wide variety of anti-vibration products on the market – anti-vibration mounts, buffers and pads to name a few – specification can, at the outset, feel like a minefield. How can design engineers ensure their mount delivers the right performance characteristics and are not hampered by incorrect installation, misuse or environmental factors? By working through the following best practice guidelines, engineers can rest assured that their mounts will continue to perform over a long and arduous life cycle.

Operating conditions, such as the temperature and environment of the application, will help determine the most suitable solution. However, other factors must be assessed through calculation & analysis to narrow the field and enable informed specification of a suitable anti-vibration mounting solution, such as:

• Deflection.

• Centre of gravity.

• Equipment configuration.

• Disturbing frequency.

• Mass moment of inertia.

• Static loading.

• Shock/thrust loading.

• Alignment.

• Natural frequency.

Assessed alone, none of the above will provide a complete picture of the system performance and if any of the input data is inaccurate, then the selected mount may not give the optimal performance characteristics. For example, understanding the centre of gravity helps to determine the loading at each mounting position, and as the loading at each position may vary, it may be necessary to select different products across the mounting system. Calculations also help ensure that mounts are not overloaded – either statically or dynamically – which will hamper performance. Ideally, all calculations should be balanced with other aspects of a system’s design, such as gross motion and dynamic conditions, to achieve the best possible isolation of vibration once the mount is installed.


The composition of a mount is also a consideration. Solutions manufactured through rubber-to-metal bonding offer the greatest benefits, for a number of reasons. Foremost is the high load bearing capacity of rubber coupled with its low modulus of elasticity, which allows the natural frequency of the mount to be tuned. Natural rubber can also be chemically manipulated to provide a broad range of characteristics through the introduction of particular additives to achieve different hardness grades or damping capabilities according to the application. Finally, when bonded to metal, the inherent strength of rubber is dramatically increased to give an even higher load capacity. For damping applications, rubber outperforms steel coil or leaf springs as the use of the latter can result in excessive vibration transmission.

Buyers' Guide Search
Search for UK supplier by name
Browse by Product Group.
JUNE 2022 Issue To view a digital copy of the JUNE 2022 issue of Hydraulics & Pneumatics Magazine, click here.

APRIL/MAY 2022 IssueTo view a digital copy of the APRIL/MAY 2022 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

July/August 2021 Annual Buyers' GuideTo view a digital copy of the JULY/AUGUST edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

BFPA YearbookTo read the latest BFPA Yearbook, click here
Talking Industry events in 2021Talking Industry Events in 2021
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe JournalOEE
Super Swivels
Impulse Automation Limited was established in 1960 and is based in the United Kingdom. We are an importer and distributor of mechatronic components used in a wide variety of industry sectors.Impulse Automation Limited
Hy-Pro FiltrationWEB LOCATOR