1 October, 2020

Eurobond introduces hydraulic sealer and pipe sealer for compressed air systems (Oct 2012)

01 October, 2012

Eurobond Adhesives Ltd., supplier of high-performance industrial adhesives and tapes for almost 30 years – has introduced a hydraulic sealer and a pipe sealer for compressed air systems.

Eurobond hydraulic sealer (EBA542)
Eurobond hydraulic sealer EBA542 is a thixotropic liquid that cures anaerobically to form a tough, high-pressure seal on all types of threaded couplings used on low-, medium- and high-pressure hydraulic lines. EBA542 hydraulic seal is said to be ideally suited for valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints. Typical cure times of 10-10 minutes can be achieved dependant on the type of metals used. To help speed up the cure time Eurobond comments that the parts should be cleaned and local heat applied to the joints with a heat gun or soft flame. EBA542 is tolerant of a light oil film and will seal up to 400 bar on 20mm fittings. It also proofs joints against vibration and will tolerate temperatures of -55degC to + 150degC.
 
Eurobond pipe sealant (EBA567)
Eurobond pipe sealant (EB567) is a high performance anaerobic adhesive that seals and locks metal tapered pipe threads and fittings such as those used in air compressors. It is said to be ideally suited to stainless steel, mild steel, aluminium, galvanised metal and other inert metals. According to Eurobond, EBA567 has excellent chemical resistance and can withstand temperatures from -50degC to 204degC. It provides an instant seal up to 1000psi and up to 10,000psi when fully cured. EBA567 is lubricated with active Teflon particles smoothing assembly and increasing sealing tightness, preventing escape of gas or other mediums. The locking action gives the parts vibration proof qualities and withstands changes in temperature and pressures. Cold temperatures will slow down the cure time but will not affect the instant seal.
 
Advantages of Eurobond pipe sealant (EBA567) at a glance:
 
·         Non shredding unlike PTFE tape.
·         Non hardening outside joint easy flush out.
·         No 'squeeze out' under pressure.
·         Seals to burst pressure of the pipes.
·         No corrosion in the joint.
 
 
Photo caption: Eurobond hydraulic sealer (EBA542).
 
 
 
 





Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
September 2020To view a digital copy of the SEPTEMBER 2020 issue of Hydraulics & Pneumatics Magazine, click here.

July/August 2020 Annual Buyers' GuideTo view a digital copy of the July/August issue of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

June 2020 Issue To view a digital copy of the June edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

BFPA YearbookTo read the latest BFPA Yearbook, click here
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe JournalOEE
Talking Industry
Super Swivels
Impulse Automation Limited was established in 1960 and is based in the United Kingdom. We are an importer and distributor of mechatronic components used in a wide variety of industry sectors.Impulse Automation Limited
IndequipWEB LOCATOR
Hy-Pro FiltrationWEB LOCATOR
PrimaryWEB LOCATOR
Newsletter
 
Newsletter