20 October, 2021

Handheld hydraulic data logger designed for a broad user profile

12 October, 2021

Webtec’s new HPM7000 handheld hydraulic data logger has been designed to meet the demands of a broad user profile, including those involved in hydraulic system diagnostics, test stands, pre-dispatch inspection or research and development.


With the versatile HPM7000 portable hydraulic data logger, which is the successor to Webtec’s long-standing HPM6000 model, users can obtain quick answers to their biggest hydraulic challenges. The HPM7000 allows repair, test, inspection and R&D professionals to connect up to 48 sensors and create different hardware configurations simply by adding or changing input modules.

Among the users set to benefit are test stand technicians who want to monitor and record variables such as flow, temperature, pressure, current, rotational speed and contamination, perhaps following the repair or rebuild of pumps, motors, pistons or valves. Using the HPM7000 eliminates the complex and time-consuming process of collecting data with pen and paper, and manually transferring this information to a PC and creating a certificate.

The device will also bring advantages to R&D professionals developing/analysing hydraulic machinery such as tractors, excavators and industrial systems. With the HPM7000 it is simple to collect traditional flow, temperature and pressure readings, and seamlessly integrate new J1939 or CANOpen sensors of different type or manufacturer into a single datalogging device.

Customer satisfaction

For pre-dispatch inspection (PDI) users, the HPM7000 will help improve customer satisfaction and reduce warranty claims. Using the Webtec device, PDI technicians can provide a far richer data set in support of machine/equipment performance prior to shipment, reducing the likelihood of end-user complaints.

Delivering plug and play functionality, the HPM7000 base model enables the simultaneous connection of up to 48 Webtec CAN sensors, or up to five external third-party CANopen sensors. Two frequency inputs or digital I/O are also possible thanks to a dual-function connector, thus facilitating the simple integration of gear flowmeters or speed sensors, for example.

The base model features two module slots which host the CAN input module and/or the analogue input module. With the former, users are able to connect CAN, CANopen, J1939 or any mixture of CAN protocols in a passive way (this module does not supply any power to the sensors), while the analogue input module enables back compatibility with sensors featuring SR (sensor recognition). The analogue module also enables connection to current (e.g. 0-20 mA or 4-20 mA) and/or voltage (e.g. 0-5, 0-10 V) sensors.

Despite its compact size, the Webtec HPM7000 features a 7- inch colour touchscreen display that is suitable for use with gloves, while additional large tactile buttons to the right of the screen allow operation in adverse conditions. Users can configure the illuminated, anti-glare screen to display the readings in numerical, bar graph, dial or graphical display mode. A variety of different data-logging modes are available with the ability to record up to 16 million measured values per test at variable intervals from 1 ms, with a total possible storage size of 12GB (approximately 250 measurements). It is possible to export all data to a PC running HPMComm 7.5 software (supplied) for further analysis or storage. HPMComm7.5 is fully compatible with Windows 10 for easy operation and accurate hydraulic analysis. By documenting the date, time and any notes with each measurement, users can quickly and cost-effectively generate certificates.

Powered by a battery or an external power supply, technicians can take advantage of a carrying strap, foldable stand or wall mounting points on the rear (for fixed installation such as test benches). The IP65-rated device features a rubberised case for protection in challenging operating environments.

www.webtec.com

https://twitter.com/webtec_products

https://www.linkedin.com/company/webtec-products-limited/




Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
SEPTEMBER 2021 IssueTo view a digital copy of the SEPTEMBER edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

July/August 2021 Annual Buyers' GuideTo view a digital copy of the JULY/AUGUST edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

JUNE 2021 Issue To view a digital copy of the JUNE 2021 issue of Hydraulics & Pneumatics Magazine, click here.

BFPA YearbookTo read the latest BFPA Yearbook, click here
Talking Industry events in 2021Talking Industry Events in 2021
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe JournalOEE
Super Swivels
Impulse Automation Limited was established in 1960 and is based in the United Kingdom. We are an importer and distributor of mechatronic components used in a wide variety of industry sectors.Impulse Automation Limited
IndequipWEB LOCATOR
Hy-Pro FiltrationWEB LOCATOR
PrimaryWEB LOCATOR
Newsletter
 
Newsletter