- Home » Editorial » Hydraulics
The right hose clamp for each application
One of the issues with using worm drive hose clamps, particularly on soft wall rubber hose, is the potential for damage to the hose itself. Where clamps are tightened it can be very easy to cut into the hose slightly. This, compounded with vibration from an engine or something similar, can cause a complete failure as the hose clamp cuts deeper and deeper. To help prevent this, many companies up-turn the edges of the clamp band. However, this only moves the sharp point and hose damage can still occur. JCS uses special material with a rounded edge for the clamp bands on all products. This rounded band offers superior protection as the sharp point which cuts into the hose is removed completely.
Tracking the benefits
With such a broad range of uses, JCS has supplied clamps across the globe for a range of uses. One of the more unusual was the use of Hi-Torque by an American University. As part of a study, the university was tracking the movement of Walruses in Alaska and the biggest challenge was not catching the Walruses but in fact securing the tracking transmitter to them.
The problem was to find a suitable method of securing the transmitter to one of the tusks, it was imperative that the transmitter did not become dislodged and cause harm to the animal. Also, the securing method needed to be impervious to constant immersion in saltwater and very low temperatures.
After several attempts (and expensive losses) using adhesives and various strapping methods, it was decided Hi-Torque clamps were the answer. Made from marine grade BS.304 stainless steel and with their rounded band edge, the clamps were successfully used for over two years with no failures and no harm to the Walruses.
-
The Aftermarket Event
02 October, 2024, 9:30 - 03 October, 2024, 15:30
Farnborough International West Entrance, Gate F -
NFPC Annual Industry Exhibition
23 October, 2024, 9:30 - 16:00
Turner Road, Worksop, Nottinghamshire, S81 7AE -
AEMT Awards
21 November, 2024
Double Tree by Hilton Hotel, Coventry -
SMART Manufacturing & Engineering Week
04 - 05 June, 2025
NEC, Birmingham UK