Telescopic loaders for agriculture

22 September, 2016

On the TL26.60 and TL30.60, these are available with two different overall machine heights with a cab which can be mounted in two different ways – in a low position that results in the very low 2.1 m height or a higher position to optimise visibility.

On the TL35.70, replacing the TL470, there is an improved load chart providing an additional 500 kg (3500 kg) of lifting capacity at the maximum lifting height (6.97 m).

On the TL38.70HF, replacing the TL470HF, there is an improved load chart providing a 300 kg increase from 3.5 to 3.8 tonne in the rated lifting capacity.

New features

All the models offer new features providing higher comfort and productivity:

- Power lift, an efficient lifting technology that optimises the use of hydraulic flows between telescopic boom cylinders to increase the lifting capacity.

- Automatic parking brake for enhanced safety and operator convenience.

- Automatic fan inverter, whereby a cycle time can be set for cleaning radiators and the air intake grill; a simple way to maintain efficient cooling.

- Boom cushion retract that automatically slows down the boom speed when the boom is nearly fully retracted or at min/max angles, increasing safety and operator confidence.

- High comfort air suspension seat, including longitudinal and low frequency suspensions. Many adjustments are available to allow the operator to find the most comfortable drive position.

- There are also a number of tried and tested smart operating features still offered as standard:

- SMS (speed management system), which allows the travel speed to be adjusted independently of the engine speed.

- SHS (smart handling system), which allows the speed of the boom movements (lifting, telescoping and tilting) to be adjusted, depending on the type of work being carried out.

- AFM (auxiliary flow management), which allows the hydraulic output to be adjusted to match attachment requirements and to set a continuous flow.

- FCS (fast connect system), which provides quick and easy interchange of hydraulic attachments via an integrated pressure-release system.

Another standard feature is the ECO mode, which maintains optimum hydraulic performance without using the engine’s full power, adjusting the main machine features to produce a balance between top performance and providing the best performance/fuel consumption ratio.

www.bobcat.com