28 March, 2024

Selecting the best lubricants for offshore equipment

18 August, 2016

By Phil Cumberlidge, business development manager, Greenmarine, Panolin International Inc.


Petroleum based (mineral) oils have been around for over 100 years and the performance and limitations of them are well-known. Now, with the advent of environmental requirements for (non-engine) lubricants for the prevention of pollution from vessels and offshore installations, the selection process for lubricants can be more confusing than ever.

The base oils of lubricants that are generally accepted as being environmentally ‘friendly’ - or ‘Environmentally Acceptable Lubricants’ (EALs) are:

• Triglycerides, commonly known as vegetable oils.

• Polyalkylene glycols, shortened to Polyglycols.

• Polyalphaolefins, or synthetic ‘hydrocarbons’ (man-made mineral oil).

• Synthetic Esters – two classes: fully Saturated Esters and Unsaturated Esters.

So, how does one decide which base oil type to select? – and then, which supplier of that base oil type lubricant does one choose, if there are more than one supplier?

First, if we take the environmental properties of the different EALs, as a ‘given’ and out of the equation, this simplifies the decision making process. Whilst there are different lengths of time for biodegradation of these lubricants to take place (minimum limit is 60 per cent biodegrading in 28 days, but some are more ‘friendly’ and degrade more than 70 per cent in that time) and some EALs are heavier than fresh water and seawater and therefore sink, out of view – not so friendly.

Look for accreditations such as Euromargerite (Ecolabel) and CEFAS (the Centre for Environment, Fisheries and Aquaculture Science for the UK). The Offshore Chemical Notification Scheme (OCNS - Group E) manages chemical use and discharge by the UK and Netherlands offshore petroleum industries. The scheme is regulated in the UK by the Department of Energy and Climate Change using scientific and environmental advice from CEFAS and Marine Scotland.

Those accredited lubricants will be in compliance with the OSPAR Convention (the Convention for the Protection of the marine environment of the north-east Atlantic), with particular reference to Annex III: Prevention and elimination of pollution from offshore sources and the Harmonised Offshore Chemical Notification Format (HOCNF), which applies to all chemicals used in connection with offshore exploration and production activities in the OSPAR maritime area. Ensure that there are no ‘substitution warnings’ for the replacement of harmful chemicals within the lubricant.

Secondly (this is the hard one to pass), it is the performance of the lubricant. What do you need to look for in the lubricant(s) you are choosing? If we use the analogy of Formula 1 Racing, the success of the car is primarily derived through the chassis, the engine/gearbox and through-race reliability; not to forget, driver input.

The base oil is the chassis, with inherent stability. Properties of the chassis of the oil include: viscosity stability (generally the most important property of the oil); anti-ageing; low temperature flow; corrosion protection; compatibility with materials in contact with the oil and effect of any water ingress (hydrolysis and demulsibility). The engine/gearbox is the designed/engineered performance of the oil - the selection of additives to complement the base oil: to enhance viscosity, or to further depress pour point for operation at lower temperatures; to provide shear stability; anti-wear/extreme-pressure additives and friction modifiers.




Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
MARCH 2024To view a digital copy of the MARCH 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JANUARY/FEBRUARY 2024 IssueTo view a digital copy of the JANUARY/FEBRUARY 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JULY/AUG 2023 Issue inc. BUYERS' GUIDETo view a digital copy of the JULY/AUGUST ISSUE of Hydraulics & Pneumatics magazine that includes the ANNUAL BUYERS' Guide for 2023, click here.

To visit the Library for past issues click here

BFPA YearbookTo read the latest BFPA Yearbook, click here ..
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe Journal
Newsletter
 
Newsletter