- Home » Editorial » Hydraulics
Pure strength: The SC 12 i 370-ton workshop crimper from Uniflex
With a crimping force of 370 tons, Uniflex’s new SC12 i is claimed by the company to be the most powerful workshop crimper for R15 industrial hoses up to 3" and high pressure hoses up to 1".
Compact solenoid valves for use in explosive atmospheres and with fuel gases
Creating precision control circuits for fluidic applications in potentially explosive atmospheres just got a little easier. New, compact solenoid valves conforming to ATEX/IECEx as well as meeting DVGW EN 161 approval for use with fuel gases, have been released by flow control specialist Bürkert. The new versions of its reliable and powerful direct-acting plunger valves offer a range connections and variants to suit many applications.
Gates sets new performance standards with MegaSys MXG 5K
Gates has introduced its latest hydraulic hose, MegaSys MXG 5K, which, claims the company, is lighter, more flexible and more durable than a typical 5000 psi (350 bar) hydraulic hose. MXG 5K offers wire spiral performance in a flexible, lightweight, high-pressure hydraulic hose using Gates patented Xpiral woven spiral technology – described by Gates as a breakthrough construction that exceeds all industry standards and most published competitive hose performance in terms of both pressure and impulse life.
Signs your hydraulic cylinder needs repairing
By Rob Woodley, managing director, Derek Lane & Co
Hoses and hose assemblies for groundbreaking fully autonomous ship
A pioneering project, supported by Rotec Hydraulics Ltd, has achieved a fully autonomous ship sail across the Atlantic Ocean. Solo and unaided, the Mayflower Autonomous Research Ship (MAS) set sail from Plymouth harbour in the UK and reached its end destination of Plymouth USA on 30 June 2022 after 36 days at sea and 3900 miles, having made two stops in Horta (Azores) and Halifax (Canada).
Seal of approval – The Polyurethane advantage
By Andy Longdon, technical sales manager, Ceetak Sealing Solutions.
Allspeeds introduces flushable Tangye Hydrapak pump
UK-based hydraulic tool specialist, Allspeeds, has introduced a new flushable capability to its Tangye Hydrapak pump range. A common problem with hydraulic pumps is the corrosion of internal components when left subjected to certain fluids over extended periods of time.
SKF food-grade bearing sets high standards in food safety
SKF has developed a deep-groove ball bearing that is designed specifically for use in the food and beverage industry. The offthe-shelf bearing, part of SKF’s Food Line series, is pre-filled with food-grade grease and incorporates an integral seal.
Why do hoses fail?
Rebecca Galley, managing director, Hydroscand UK, considers how companies can minimise the risk of hydraulic hose failure and/or prevent a burst hydraulic hose.
Lights, camera, action
In live broadcasting, time is of the essence. This case study showcases how Hydraulics Online designed a hydraulic system that automatically keeps the camera crane level from one location to another.
Celeros Flow Technology injects new life into 40-year-old SAGD pump
Celeros Flow Technology has injected new life into a heritage pump for a Canadian heavy oil recovery customer, enabling it to increase production. The pump – a Mather & Platt BB5 – was more than 40 years old and had been subject to numerous post-installation alterations.
Portescap’s new miniature motor R&D facility increases customisation capability
The design and development of miniature motor motion solutions is integral to applications from medical equipment to robotics through to industrial power tools, in settings that demand performance and reliability. Concept design, development and testing not only has to be rigorous and relevant to specific application conditions, but also has to be fast enough to meet the needs of demanding markets. As a result, Portescap, which develops miniature motors for global OEMs, has enhanced its R&D capabilities by creating a new Engineering Lab.
New hydraulic power packs for portable machine tools
The new PP-Series electric and diesel-powered units from Enerpac are purpose-designed to supply hydraulic flow to Enerpac portable machine tools, including flange facing machines, clamshell cutters, hot tapping machines and decommissioning tools. The units are also compatible with other brands of portable machine tools.
How to prioritise quality and efficiency for hydraulic systems post pandemic
By John Joyce, marketing director, Brennan Industries.
Uniflex UVC 50: Clean air in service workshops
Uniflex hose cutting machines make clean cuts – but the generation of dust, fumes and odors is inevitable. Therefore, Uniflex has developed the UVC 50, an external suction and filter device for simultaneous use with up to three cutting machines. A balanced compromise between volume flow and negative pressure keeps the air clean during the cutting of hose assemblies and protects the operators from fine particles. After all, health at the workplace should always have top priority.
-
Smart Manufacturing & Engineering Week
05 - 06 June, 2024
NEC, Birmingham -
HILLHEAD 2024
25 June, 2024, 9:00 - 27 June, 2024, 16:00
Hillhead Quarry, Buxton, Derbyshire UK
