29 March, 2024

Smart compressed air and vacuum system generates substantial energy savings for brick maker

20 February, 2020

The Denton plant had previously used liquid ring vacuum technology for clay extrusion but required a more efficient solution which would also allow them to remove the risk of Legionella from the cooling towers used to support the existing liquid ring pumps.

The new vacuum system needed to be suitable for the high water content and high ambient temperatures involved in Wienerberger’s clay extrusion application, Based on the substantial energy saving potential and the option to remove the cooling requirement, Wienerberger chose the Atlas Copco GHS585 VSD+ Humid oil-sealed, rotary screw vacuum pump to meet the site’s requirements.

Set point control

The smart features of the Atlas Copco GHS585 VSD+ allow Wienerberger to link directly into the application’s PLC system providing direct control of the pump when the production line is running. This enabled the customer to benefit from energy savings due to the set point control feature of the vacuum pump, which optimises the process and provides maximum energy efficiency by ensuring that only the vacuum required is generated.

Furthermore, it has now become the Wienerberger parent company’s policy to switch from liquid ring vacuum pumps to rotary screw vacuum pumps in all its production plants. The whole operation was carried out over a three-phase installation plan and included solving an accommodation problem in siting the new equipment. This is where the bike store came into the picture. In the first phase, the GA75+ compressor and FX dryer back-up units were installed in the bike store, which was eventually re-sited in the old compressor house from which the original units were removed.

The second phase saw the new main duty compressor system equipment in place and commissioned before completion of the final phase, involving removal of the redundant units and installing ducting.

At the same time, the central control and monitoring system was linked to the newly installed Atlas Copco GHS VSD+ oil-sealed and air-cooled rotary screw vacuum pump, which solved the company’s air extraction reliability issue.

The net result of this major makeover project in terms of system savings and a potential payback within only two years is good news for Miles Coppinger, who commented: “The estimated energy saving from the first two phases is in the region of £38,000 per year. By replacing the old equipment, we avoided the cost of overhauls, which would have amounted to at least another £30,000. Naturally, I will keep a sharp eye on continuing performance and will be establishing data from sensors both in terms of kW/hr/m3 air power costs, but also as power related to the total volume of product output for any given period.”

He went on to say that he valued the technical support and efficiency with which the project was conducted by Atlas Copco and the peace of mind that a Total Responsibility service plan offered: “I am happy to work with them and pleased to report the good news that Wienerberger has signed a blanket agreement to make Atlas Copco a preferred supplier in the UK.”

Additional benefits derived from the new installation is that Wienerberger has reduced its carbon footprint by almost 200,000 kg per annum and, furthermore, they are safe in the knowledge that key components of the system are proven to be top-performing energy-reducing products. These are the NEOS inverter in the GA VSD+ compressor and the Optimizer 4.0 master controller. Both are included in the Carbon Trust’s Energy Technology List. Inclusion in the Lists carries entitlement for businesses which purchase these technologies to accelerated tax relief on their profits.

www.atlascopco.co.uk/compressors




Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
MARCH 2024To view a digital copy of the MARCH 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JANUARY/FEBRUARY 2024 IssueTo view a digital copy of the JANUARY/FEBRUARY 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JULY/AUG 2023 Issue inc. BUYERS' GUIDETo view a digital copy of the JULY/AUGUST ISSUE of Hydraulics & Pneumatics magazine that includes the ANNUAL BUYERS' Guide for 2023, click here.

To visit the Library for past issues click here

BFPA YearbookTo read the latest BFPA Yearbook, click here ..
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe Journal
Newsletter
 
Newsletter