28 March, 2024

Burkert helps Jamaican patties remain a firm favourite

31 October, 2018

Incorporated 30 years ago in June this year, Cleone Foods produces Jamaican patties and distributes them under its Island Delight brand name. The company relies on its process equipment to ensure an uninterrupted supply of its tasty products and Burkert has proven itself up to the task with process valves that have been in operation for ten years before requiring a service.


Derived from the Cornish pasty, Jamaican patties can contain a range of fillings with a distinctive, spicy taste. The company, which is based in Birmingham, has expanded several times since its inception, including into bigger premises.

Wade Lyn, the founder and company director of Cleone Foods, created the company with a clear objective of creating a strong brand that delivered high quality products without compromise. This concept was also used in selecting the equipment used to manufacture the Jamaican patties and the reason behind choosing Burkert fluid control valves.

Wade commented: “We have a passion for creating our products and quality matters a lot – not just for food industry regulatory standards but for the taste and the experience of our range, it has to be right.”

Maintaining productivity

Maintaining productivity is very important in any industry, especially in the food and beverage sector, where downtime needs to be minimised wherever possible. Therefore, being able to replace components, such as control valves, in a matter of minutes ensures that production lines can continue operating with minimal delays.

For the past 10 years, Burkert Type 2000 flow control valves have been used to regulate the flow of steam and hot water to the cookers, in an area that has repeated washdowns. The choice of control valve has delivered a decade of reliable service in an environment that would have caused lesser components to fall short.

More recently, the Type 2000 underwent a design update that, among other things, reduced the overall length of the fluidic module. Therefore, if a complete valve assembly was to be replaced, some additional work would be required to reposition the threaded joints to enable the new valve to be installed.

However, in this case, only the original valve stem and actuators were to be replaced, leaving the valve body in place. Fortunately, even though the Type 2000 has been updated, the new components are still compatible with the original valve bodies, minimising the downtime required to complete the job.

Prolonging service life

Pneumatically controlled valves have two ports, inlet and exhaust and in a humid atmosphere damp air can reduce the long-term reliability of the valve. When the valve closes a small amount of ambient air is drawn into the valve to fill the void. In certain circumstances it is advisable to install a silencer on the valve or to draw the air from a cleaner source, such as the inside of a control cabinet. So, when the local Burkert sales manager visited the production site he offered this advice on prolonging the service life of the new valves even further than the 10 years offered by the original components.

Having confirmed that the new valve stem and actuator would be a direct replacement for the current components, the job of exchanging them would only take about 15 minutes. If the valve body needed to be replaced this would take considerably longer, especially if the valves had been welded in place.

Greg Wainhouse, account manager for Burkert, commented: “Hygiene is of the utmost importance in the food and beverage industry so if any maintenance work requires a system pipeline to be opened then it must be cleaned properly before production can restart. In this case, replacing the valve stem and controller was a really simple operation and the customer now has all the benefits of the latest incarnation of the Type 2000 valve.”

Wade Lyn concluded: “We have relied on the Burkert valves for many years now and they have certainly delivered in terms of service life. The new valve actuators were easy and quick to install and the advice we received from Burkert will help us to prolong their reliability even further.”

www.burkert.co.uk




Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
MARCH 2024To view a digital copy of the MARCH 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JANUARY/FEBRUARY 2024 IssueTo view a digital copy of the JANUARY/FEBRUARY 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JULY/AUG 2023 Issue inc. BUYERS' GUIDETo view a digital copy of the JULY/AUGUST ISSUE of Hydraulics & Pneumatics magazine that includes the ANNUAL BUYERS' Guide for 2023, click here.

To visit the Library for past issues click here

BFPA YearbookTo read the latest BFPA Yearbook, click here ..
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe Journal
Newsletter
 
Newsletter