28 March, 2024

Designs on efficiency and reliability

21 March, 2017

Matthew Wood, technical director, Ashton Group, considers the importance of correct seal and filter design.


Hydraulic seals are critical components within plant and machinery to facilitate turning fluid power into linear motion. Other critical parts include the oil filters used on hydraulic equipment in order to remove contaminants from the oil pumped through the system.

However, when fitting seals or filtration equipment to plant and equipment something that is often overlooked is the importance of ensuring that these parts are designed to be suited to the specific task or tasks that they are intended for, as well as the environment they will be expected to work within.

In most instances, when a seal or filter fails in operation the problem is likely not to be due to the part itself but rather because it was not designed correctly for its intended use in the first instance. Seals or filters might not always fail straight away even if they are designed incorrectly – it might require certain conditions before this scenario occurs – but nevertheless when they do cease to function the finger is often pointed in their direction undeservedly.

The alternatives

Therefore, it is critical to get the design right from the outset. Designing seals or filters may be a tried-and-tested procedure for many designers, resulting in seals and filtration equipment that is right for the job in hand. However, even the most experienced designers can from time to time ‘get stuck in their ways’ and not see an alternative way of designing the part.

For example, if developing a piston with a view to integrating it within systems used for the type of application where weight reduction could reap benefits such as reductions in running costs – it might be worth considering one of the newly engineered plastics as a preferred material with which to manufacture the piston with integrated seal rods rather than relying on the more traditional (and considerably heavier) metal or metal alloy option.

Some of the newly developed engineered plastics have the same abrasive resistance and strength as metals and alloys while offering a number of other benefits. For example, they are easier to machine, meaning they can be considerably cheaper to make. Also, because these plastics are more hygienic and easier to clean than metals and alloys, they are ideal for sectors such as food & beverage manufacturing where they can more easily conform with the relevant food regulations – particularly if the plant and equipment they are fitted to will be operating close to the area of food production.

Optimising design processes

In this regard, it can be well worthwhile for designers to call on the services of a company that is able to help to optimise their design processes in order to reap greater benefits in terms of longevity/increased uptime and cost savings etc.

Ideally, this company should also be able to manufacture the bespoke seals in question (as well as provide a wide range of standard seals when required), whilst also being able to provide a value-added advisory service whereby it can analyse the company’s design processes and determine potential areas of improvement or enhancement.

Many experienced designers go about their work in a tried-and-tested manner. Each time they design a new seal or filter the specification might vary slightly from previous versions, but they may be hesitant to change the specifications in greater detail, even though effective options might be available. This is why it can be highly beneficial to rely on a ‘second pair of eyes’; people from another organisation who are able to ask the question ‘why do you do things in a certain manner?’, or ‘have you thought about doing it this way?’. At the end of the day, it really comes down to teamwork.

www.ashtonseals.co.uk




Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
MARCH 2024To view a digital copy of the MARCH 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JANUARY/FEBRUARY 2024 IssueTo view a digital copy of the JANUARY/FEBRUARY 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JULY/AUG 2023 Issue inc. BUYERS' GUIDETo view a digital copy of the JULY/AUGUST ISSUE of Hydraulics & Pneumatics magazine that includes the ANNUAL BUYERS' Guide for 2023, click here.

To visit the Library for past issues click here

BFPA YearbookTo read the latest BFPA Yearbook, click here ..
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe Journal
Newsletter
 
Newsletter