27 July, 2017

New valves can increase pneumatic system safety ratings to SIL1 and SIL2

09 December, 2016

Industries with highly automated processes, such as food & beverage and pharmaceuticals face many challenges, especially in terms of maintaining a safe environment. As increased legislation continues to require higher standards, Bürkert Fluid Control Systems has developed a series of innovative safety valve solutions that can be retro-fitted to existing control systems or incorporated into new designs.


Increasing levels of automation in industrial processes has brought with it higher levels of safety and reliability. This has led to, amongst other things, the adoption of the European Union’s Machinery Directive, 2006/42/EC and a number of other new standards such as IEC 62061. Within both of these pieces of legislation are details of increased safety functions, known as Safety Integrity Levels (SIL) or Performance Levels (PL) that categorise control components and structures with regard to fault detection, redundancy and reliability.

Essentially, plant manufacturers and operators are required to assess the safety of their equipment and if necessary make improvements to bring it within compliance. One of the crucial aspects of this evaluation is the provision of emergency valves and stop procedures that prevent harm in the event of an employee intervening in a process.

[head] Specific requirements

Safety circuits have very specific requirements, especially in terms of wiring and redundancy of components. As a simple example, an emergency stop circuit should have two sets of contacts in the pushbutton, which should be hard-wired to a safety relay or safety PLC which in turn is hard-wired to contacts that stop the process. This sort of arrangement would be classified as PLc or SIL1, which would be suitable for low level risks.

If the plant risk assessment has identified a higher category for a particular process, then it will be necessary to improve the reliability of the safety circuit. This can be done by introducing additional redundancy, which in the example above would be the addition of a control valve that could shutdown the process in question in the event that the original contacts had failed.

Many automated processes use pneumatic valve islands, connected to PLCs, to maintain the production process and any safety related circuits are separate from the valve island. In the wake of the introduction of EN ISO 13849, Bürkert has created two new valve types that could be retro-fitted onto the valve island and used for a safety-related shut-off, thanks to the additional wiring which allows the valve to be connected directly to a safety relay.

Meeting the requirements

This development enables plant managers to ensure their control structures meet the requirements for PLc or SIL1 with a compact solution and minimal changes to the circuit. The only addition to the control cabinet is the safety relay, if it was not already present, which keeps both costs and space to a minimum.




Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
MagazineTo view a digital copy of the latest issue of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

Previous IssueTo view a digital copy of the April issue of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

Previous IssueTo view a digital copy of the March 2017 issue of Hydraulics & Pneumatics Magazine, click here.

Buyers Guide - July/August Issue 2016To view a digital copy of the Buyers' Guide issue 2016 issue of Hydraulics & Pneumatics Magazine, click here.

July/August 2016 Annual Buyers Guide Issue
BFPA YearbookTo read the latest BFPA Yearbook, click here
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2016To read the official BCAS Compressed Air & Vacuum Technology Guide 2016 click here
Smart Machines & FactoriesSmart Machines & Factories Magazine - the UK's first dedicated journal focusing on the fourth industrial revolution and transforming to a smart manufacturing era.
Newsletter
 
Newsletter