29 March, 2024

CERTIFIED FOOD SAFE PRESSURE REGULATORS

19 October, 2021

MEASURE MONITOR CONTROL offers a range of 316L pressure regulators with FDA approved seals and EC1935/2004 MOCA certification. This certification means that the materials have been tested to eliminate any potentially harmful contamination caused by chemical migration from the construction materials into the media and therefore an end product. Low, medium and high pressure regulators are available with this certification such that control pressures can be between 5mbar and up to 200bar with units ranging in size from 1/8” to 2”, suitable for food packaging and shielding gases and beverages with pH >4.5 and <5% alcohol content. Matching certified filter units are also available.


PLD3: COUPLING USED ON PLUMBING SYSTEMS

19 October, 2021

The PLD3 is a coupling used on plumbing systems, which connects the internal-pressure-measurement equipment according to the standard ISO 15171-1 (or SAE J1502). Designed to work at 40 MPa with a burst pressure of 160 MPa, it is available in one size only (i.e., DN06 = size 1/4), as per the standard ISO 15171-1. Its fl¬at face construction minimises air inclusion and fl¬uid spillage.


DATA-LOGGING CAPABILITY

22 September, 2021

WEBTEC has announced its highly popular HPM110 digital pressure gauge is now available with a USB interface to facilitate data logging. This optional version with real-time clock, records both current measured pressures, as well as minimum and maximum values. Stored data can be transferred to a PC or laptop in CSV format, with a time and date stamp against recorded pressures. Such data sets are useful for trend analysis or specific system events that requires investigation.


Introducing the HSC/5000 Series

20 September, 2021

www.holmbury.com


NEW FAST-RESPONSE ONLINE HYGROMETER SYSTEM

20 September, 2021

The SF82 Online Fast Response Hygrometer from Michell Instruments provides customers with more choice and flexibility for dew point and trace humidity measurements. It complements the popular Easidew Online Universal Dew-Point Hygrometer by covering a higher dew-point range up to +60 °C. Developed as a fast-response, quick-to-install hygrometer system, the SF82 covers the complete dew-point measurement range of -60 up to +60 °C dew point.


SEALING SOLUTIONS FOR BREWERIES

10 September, 2021

FPE SEALS says its knowledgeable team is experienced in sourcing essential parts, needed for equipment in the food and beverage sector.


ECONOMICAL AND RELIABLE AIR

09 September, 2021

THORITE is one of the UK’s largest independent suppliers of pneumatic, compressed air and fluid handling products and systems.


COMPRESSED AIR FILTRATION REQUIREMENTS

08 September, 2021

HI-LINE INDUSTRIES, an established and reputable UK manufacturer of high-quality compressed air purification equipment, has announced it is able to offer a cost-effective and proven way of meeting the ongoing demand for replacement compressed air filters. The company says rather than pay for expensive and often low-efficiency OEM filters, an increasing number are turning to Hi-line’s vast range of alternative elements, which frequently provide an ‘upgrade’ on competitor solutions at less cost.


INDUSTRY 4.0 READY VALVE ISLANDS

08 September, 2021

CAMOZZI AUTOMATION has announced it has extended its popular range of Industry 4.0 ready Series D valve islands, with the introduction of 2 new sizes; Size 2 (16mm) and Size 5 (10.5mm & 16mm).


PSL: A NEW MULTI-CONNECTION SYSTEM

08 September, 2021

All PSL plates are equipped with DN ISO 16 and / or ISO 19 fl¬at face couplings, since both can be mounted in the same seats. The couplings are secured to the plates with highly-resistant elastic rings that allow them to rotate, thus avoiding accidental unscrewing or potential damages to the hydraulic pipes during assembly or usage. All the couplings are available with several connection threads according to customers’ needs and the mobile part is equipped as standard with an integrated decompression system that allows the two half-plates to be connected even in the presence of residual pressure on the male side.


RADIAL SHAFT SEALS MEET DIVERSE CHALLENGES

18 August, 2021

FREUDENBERG SEALING TECHNOLOGIES has announced it has developed a broad portfolio of Simmerring radial shaft seals to meet the diverse challenges of the food, beverage, pharmaceutical and chemical industries. This includes various product families in different materials that meet the industry specific legal requirements.


REDUCING LENGTH WITHOUT COMPROMISING STRENGTH

16 July, 2021

CAMOZZI AUTOMATION says its new Series QL short stroke cylinder has a reduced length, making it ideal for confined or challenging spaces, yet it still offers the same strength as an ISO 15552 or ISO 21287 cylinder.


VFH1: THE REVOLUTIONARY SCREW COUPLINGS

16 July, 2021

With a working pressure of 35 MPa, this series of couplings is available from DN20 to DN50. The main features of these couplings are the high ¬flow rates and the reduced pressure drops. Another characteristic of this series is that no tool is required to connect the two half-couplings, as the sleeves are equipped with two wings that facilitate their manual screwing and possibly the use of a hammer, since the connection is allowed with residual pressure. Aluminium caps are also available to protect the connection threads and, for some sizes, there are also API 16D (BOP type) approved versions.


NEW MANAGING DIRECTOR APPOINTED

23 June, 2021

HYDRAFORCE HYDRAULICS, a manufacturer of high-performance hydraulic valves and manifold systems based in Birmingham’s Advanced Manufacturing Hub, has appointed Jon Bradley as its new managing director.


NEXT GENERATION OF CONTROLLERS

09 June, 2021

AIRMASTER, the CMC-owned embedded air compressor controls brand for OEMs, has revealed its next generation of controllers after launching AIRMASTER FIT.


Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
MARCH 2024To view a digital copy of the MARCH 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JANUARY/FEBRUARY 2024 IssueTo view a digital copy of the JANUARY/FEBRUARY 2024 edition of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

To visit the Library for past issues click here

JULY/AUG 2023 Issue inc. BUYERS' GUIDETo view a digital copy of the JULY/AUGUST ISSUE of Hydraulics & Pneumatics magazine that includes the ANNUAL BUYERS' Guide for 2023, click here.

To visit the Library for past issues click here

BFPA YearbookTo read the latest BFPA Yearbook, click here ..
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Offshore Europe Journal
Newsletter
 
Newsletter