22 April, 2018

New material from SealXpress

26 September, 2017

SealXpress, based in Oldbury, West Midlands, has introduced what it describes as the first polyurethane material that is under 80 shore hardness. U505-P79 combines the positive properties of elastomers with the properties of polyurethanes and is characterised by high flexibility with regard to possible application areas.


Efficient sealing systems in fluid power applications

26 September, 2017

By Bob Goss, senior technology specialist. Henkel Ltd.


Triark Pumps services DPF cleaning process

26 September, 2017

Ceramex, a specialist in Diesel Particulate Filter (DPF) cleaning and inspection turned to Triark Pumps when pump failure loomed.


Precision of Parker motors and drives demonstrated in radiographic tilting table

26 September, 2017

Parker Hannifin has gained new business which highlights the benefits of using the company’s SMB low-inertia brushless servo motors and SLVD-N servo drives for the safe and smooth movement of medical patients.


Lee Cross Port Plugs featured at Offshore Europe

26 September, 2017

Lee Cross Port Plugs are a plugging solution specifically engineered to seal cross port passageways. This configuration is a variant of the original Lee Plug that set industry standards over 65 years ago.


Amarinth secures pump order from ZADCO

26 September, 2017

Amarinth, the company specialising in the design, application and manufacture of centrifugal pumps and associated equipment to the oil & gas, petrochemical, chemical, industrial and power markets, has secured an order from ZADCO for a super duplex API 610 OH3 pump, and utilising video conferencing significantly reduced project cost.


Trelleborg Sealing Solutions helps develop cutting-edge subsea product

26 September, 2017

When faced with the challenge of helping to create a product to boost safety and efficiency for offshore engagement, Trelleborg developed a complete sealing solution.


The importance of accumulators in wind turbines and general hydraulic systems

26 September, 2017

Hydraulics are commonly utilised to control the yaw, pitch and braking systems on modern wind turbines. Accumulators are typically used along with hydraulic power units to feather the blade pitch. Accumulators also serve as an auxiliary power storage device to quickly and safely rotate the blade to a null position in extreme wind conditions.


Sunfab UK recruits new sales manager

25 August, 2017

Tim Duffy has been appointed as the new sales manager for Sunfab UK Ltd., taking over from Marc Burns who will now be looking after Sunfab USA Inc.


The right credentials

23 August, 2017

David McLean, hydraulics divisionai manager at Tidyco Ltd., discusses the type of design, service and maintenance provision end-users and OEMs should insist on from their hydraulic and pneumatic products and system providers.


Selecting a hydraulic flow meter

23 August, 2017

By Martin Cuthbert, managing director, Webtec Ltd.


The TCO equation

23 August, 2017

Dr. Cameron Watson, general manager, lubricants technology-OEM & direct sector, considers the importance of a wider understanding of the critical part lubricants play throughout the operational life of plant and equipment.


Neilson Hydraulics expands with Hatz Engines

23 August, 2017

South Yorkshire-based Neilson Hydraulics is expanding its range of engine driven hydraulic power units to incorporate Hatz silent pack engines.


New MP Filtri diesel filtration unit featuring an ICM

23 August, 2017

MP Filtri has designed a new bespoke diesel filtration unit featuring an ICM (In-line contamination monitor). The GRM503 is an essential piece of equipment for production line cleanliness and can be used in a wide range of sectors, from industrial through to mobile.


New crimpers and associated products from Uniflex

23 August, 2017

S3 Light


Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
Magazine To view a digital copy of the latest issue of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

Previous IssueTo view a digital copy of the January/February issue of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

Buyers Guide - July/August Issue 2017To view a digital copy of the Buyers' Guide issue 2017 issue of Hydraulics & Pneumatics Magazine, click here.

July/August 2017 Annual Buyers Guide Issue
BFPA YearbookTo read the latest BFPA Yearbook, click here
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2018To read the official BCAS Compressed Air & Vacuum Technology Guide 2018 click here
Smart Machines & FactoriesSmart Machines & Factories Magazine - the UK's first dedicated journal focusing on the fourth industrial revolution and transforming to a smart manufacturing era.
Newsletter
 
Newsletter