24 September, 2017

Losi M+S Hydraulic MAP series axial piston motor

22 October, 2015

M+S Hydraulic has launched a new range of competitively priced high-pressure axial piston fixed displacement swash plate hydraulic motors. Key features include:


Hydraulic motors from Bosch Rexroth offer higher power density

25 September, 2015

Bosch Rexroth has improved the design of its compact series of Hägglunds hydraulic motors, giving the range greater power density and the ability to deliver full torque and full speed simultaneously. The new Hägglunds CA 10 to 40 motors are considerably smaller and lighter in design, while still maintaining the same operational levels of the previous version. The improvements see the hydraulic motor extend down to 10 Nm/bar.


Prepare your pumps for the colder weather ahead

25 September, 2015

With the harsh, cold winter months fast approaching, Andy Cruse of Eriks pump division, calls on businesses to prepare and maintain pumping equipment now, to enhance productivity and ensure business continuity.


Phoenix PG-Therm successfully seals industrial turbocharger

25 September, 2015

Traditionally, high temperature sealing applications (>500degC) have proved difficult for gasket materials. Many standard gasket materials suffer rapid thermal degradation at temperatures, leading to a loss in sealing performance and eventual failure. Flexible graphite, which is known as a high-temperature material, will suffer oxidation at these temperatures resulting in weight loss and an inability of the gasket or seal to support the compression load. Invariably this will result in seal failure and leakage.


Approved EMC emissions testing for Hydraproducts power packs

25 September, 2015

In response to the increasing demand of mobile application customers for compliance with ‘E’ Marking, Hydraproducts’ DC power packs are tested for EMC emissions by an approved facility.


MGR calls for safety first as it launches new hydraulics range

25 September, 2015

A Midlands hydraulics specialist is calling for industry hazards to be more widely acknowledged as it expands its product range with the launch of its new accumulator safety blocks, which are immediately available from stock.


Quick delivery time in EMEA for Eaton motors

25 September, 2015

Power management company Eaton has located the assembly and testing of its Char-Lynn Low Speed High Torque (LSHT) orbital motors in Havant, UK, and now offers lead times of as little as three weeks.


Polymer solutions to improve the efficiency of water systems

25 September, 2015

Fluid handling equipment may suffer from multiple problems including physical and mechanical damage as well as general or localised erosion and corrosion. These problems are linked to decreased efficiency and poor performance, leading to increasing operational costs. Minimising performance deterioration is therefore an important factor for pump manufacturers and end users. Indeed, hydraulic losses account for most of the efficiency decrease (9 per cent for a mixed flow pump to 20 per cent for radial flow). Coating technology can help in decreasing these losses, increasing the pump’s performance and reducing operational costs.


Trelleborg and Schoolhill in Shah Deniz project

25 September, 2015

Trelleborg Sealing Solutions claims to have “pushed the barriers of science” to produce a “highly innovative” seal for a valve designed by Schoolhill Hydraulic Engineering for BP’s Shah Deniz field.


New universal gas charging kit for accumulators from Hydrotechnik

25 September, 2015

Hydrotechnik has launched its new universal World Wide nitrogen gas charging kit for accumulators, dampers, fire suppression and other pneumatic or gaseous systems.


Keep your hydraulic hoses safe and operational

25 September, 2015

The British Fluid Power Association (BFPA) considers some important aspects to consider when sourcing, fitting, maintaining or replacing hydraulic hose and hydraulic hose assemblies as part of a service and maintenance regime in mission-critical sectors such as quarries and mines.


Practical contamination management for hydraulic systems

10 September, 2015

By Iain Hanson, general manager – fluid power, Brammer UK.


Quick, safe and accurate control of heavy loads in motion

28 August, 2015

SPX Power Team has developed a PLC synchronised lifting and lowering Motion Control System (MCS) to reduce the risk of bending, twisting or tilting when lifting heavy loads in motion. When a large object is moved, stresses are placed on the object due to uneven weight distribution or load-shifts between the lift points. If the mover is not careful, the object can bend or twist creating a stress riser that can cause hundreds of thousands - or in the worst cases - millions of dollars in damage.


Tube connection system for extreme conditions

28 August, 2015

The multi-part steel flare fittings are part of the Stauff Connect range which was developed for the detachable connection of tubes. They consist of fitting bodies, cone adapters with O-rings, support sleeves and union nuts and they are suitable for all common metric outer tube diameters from 6 to 42 mm.


Enerpac hydraulic cylinder lifting accuracy enables Pioneering Spirit fast lift

28 August, 2015

Enerpac has supplied the high pressure, hydraulic cylinder technology for the topsides lift system beams on Allseas ‘Pioneering Spirit’ vessel. The cylinders are an integral part of the vessel’s lift system, enabling the installation and decommissioning of complete topsides weighing up to 48,000 tonnes.


Events
 
Buyers' Guide Search
 
Search for UK supplier by name
Browse by Product Group.
Magazine
Magazine To view a digital copy of the latest issue of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

Air-Tech Exhibition 2018
Previous IssueTo view a digital copy of the May/June issue of Hydraulics & Pneumatics Magazine, click here.

For a FREE subscription please click here

Fluid Power & Systems 2018
Buyers Guide - July/August Issue 2017To view a digital copy of the Buyers' Guide issue 2017 issue of Hydraulics & Pneumatics Magazine, click here.

July/August 2017 Annual Buyers Guide Issue
BFPA YearbookTo read the latest BFPA Yearbook, click here
BFPA Training AcademyClick the image to go to the BFPA Training Academy website
Compressed Air & Vacuum Technology Guide 2016To read the official BCAS Compressed Air & Vacuum Technology Guide 2016 click here
Smart Machines & FactoriesSmart Machines & Factories Magazine - the UK's first dedicated journal focusing on the fourth industrial revolution and transforming to a smart manufacturing era.
Newsletter
 
Newsletter